The Enduraplas 2000 Gallon Plastic Vertical Water Storage Tank (SKU TLV02000) is a bulk polyethylene tank built for above-ground water storage where you need real volume in a stable, freestanding footprint. It stands a launch-verified 93 inches tall on a 90 x 90 inch base and holds 2,000 gallons, making it a common choice for rural fire-water reserve, hauled-water and well storage, rainwater and industrial water reuse trains, and general bulk water holding.
Will it work for your site?
Two numbers drive the decision. First, weight: filled with water this tank carries roughly 16,680 pounds sitting on a 90 x 90 inch base, so the pad underneath it has to be engineered for that load, not poured to a guess. Second, the height: at 93 inches tall, plan doorway, gate, and overhead clearance before delivery day. Verify the fill and access connections against the technical drawing shown on this page:
- Outlet: 2 in. threaded fitting
- Access: 16 in. lid
Run your reserve volume through the Tank Sizing Calculator and the Tank Sizing Guide to right-size the tank, and review concrete pad sizing for above-ground polyethylene tanks so the base is rated for the full-water load.
The mistake to avoid
This is a water-service tank, designed around water at 1.0 specific gravity. Its specific-gravity rating is not published on the spec sheet, so do not press it into chemical or high-specific-gravity service on assumption. A denser liquid puts more load on the walls and fittings than water does, and the correct answer is to call 866-418-1777 and confirm the right tank before you fill it with anything heavier than water. For fire-reserve installations, size the volume against your requirement first; our guide on rural fire-water reservoir design and NFPA 22 sizing walks through it, and for reuse setups see industrial water reuse tank topology. On a new install, run a hydrostatic fill test to check pad settlement and fitting seal before you rely on it.
Freight
This tank ships LTL freight, quoted to your ZIP code. Get a live number with our Freight Cost Estimator, or call 866-418-1777 and we will quote it and confirm the 2-inch outlet, 16-inch lid, and lead time with you before you order.
