The Enduraplas 2100 Gallon Dark Green Vertical Water Storage Tank is a polyethylene vertical tank that ships LTL from Converse, TX, and is built for bulk water storage where you need real volume on a stable, compact footprint. It holds 2,100 gallons, stands 100 inches tall, and is an 85-inch-diameter cylinder, so it stores a large reserve without sprawling across your site. The dark green color suits outdoor installations. Buyers searching for an Enduraplas water storage tank or a vertical storage tank for water storage at this scale are usually weighing three things: whether it works for the install, what freight runs to their ZIP, and what mistake to avoid before fill day.
Will this tank work for your install?
Filled with water, this tank carries roughly 17,514 pounds of contents, and it is rated to a maximum contents weight of 19,265 pounds. That number drives everything underneath it: a full 2,100-gallon vertical tank concentrates that load over an 85-inch-diameter base, so the pad has to be engineered for it. Pour a level, full-support concrete pad sized to the 85-inch bounding footprint before you order. Our guide to concrete pad sizing for above-ground polyethylene tanks walks through the ACI 360R-10 framework so the slab matches the loaded weight, not just the empty tank. The tank is rated to a specific gravity of 1.1, which comfortably covers water (SG 1.0) and leaves a small margin for water carrying light dissolved solids.
Sizing it to your demand
If you are still deciding whether 2,100 gallons is the right reserve, run your numbers through our Tank Sizing Calculator and read the Tank Sizing Guide before you commit. For rural fire-protection storage, our fire-water reservoir design guide covers NFPA 22 sizing discipline and freeze protection for cold-climate sites, and if you are aggregating grey-water, rainwater, or HVAC condensate, the industrial water reuse topology guide shows how a tank this size fits a banded storage train. Fitting and gasket configuration is confirmed at order rather than assumed from this listing, so call 866-418-1777 to spec your inlet, outlet, and bulkhead arrangement before you buy.
Commissioning the tank
Once the tank is on its pad, fill and prove it before you put it into service. Our hydrostatic test methodology guide covers the water-fill discipline, pad settlement monitoring, fitting leak detection, and hold-time math so you catch any settlement or leak issue at acceptance instead of months later. The common mistake on a vertical tank this large is under-building the pad: a tank rated near 19,000 pounds loaded will find any soft spot in an undersized or unlevel slab, so settle that before fill day. The technical drawing on this page shows the tank geometry for your pad and connection planning.
This vertical water storage tank ships LTL freight from the Enduraplas plant in Converse, TX, with the cost quoted live to your ZIP. Get your number on the Freight Cost Estimator or call us at 866-418-1777 and we will quote it for you. Use the estimator early so the logistics are settled before your pad is poured.
