The Enduraplas 2500 Gallon Plastic Vertical Water Storage Tank (SKU TLV02500) is a polyethylene bulk-storage tank built for reliable above-ground water service. It carries a nominal 2,500-gallon class rating with a verified working capacity of 2,710 gallons, standing 113 inches tall on a 90 by 90 inch footprint. If you are matching a tank to a demand curve, run your numbers through the Tank Sizing Calculator and the Tank Sizing Guide before you commit to a size.
Will it work for your site
This is a vertical water storage tank for irrigation, process, and reserve applications where you need real volume without a poured concrete cistern. It is rated for water and water-based service; no specific-gravity rating is published for heavier liquids, so call 866-418-1777 before storing anything with a specific gravity above 1.0. The number that drives your install is weight: filled to full capacity, this tank carries roughly 22,601 pounds. Across the 90 by 90 inch footprint (56.25 square feet), that is about 402 pounds per square foot bearing on your pad at full fill. That load has to land on a properly engineered foundation, not bare soil. Our guide on concrete pad sizing for above-ground polyethylene tanks walks through the ACI framework for a tank of this mass.
Fittings and access
Fittings per the drawing: one 2 inch threaded fitting and a 16 inch lid for access and inspection (see the technical drawing on this page for placement). No bottom outlet or drain is listed in the tank's published fittings, so if your plumbing depends on gravity draw or full evacuation, confirm outlet location and whether your threaded fitting needs a gasketed bulkhead before ordering. A two-minute spec check at 866-418-1777 prevents a wrong-plumbing return.
The mistake to avoid
Do not skip the acceptance test and do not underbuild the foundation. Before you put this tank into service, fill it and hold it. Our hydrostatic test methodology covers water-fill discipline, pad-settlement monitoring, and fitting leak detection during the hold. Catching a settling pad or a weeping fitting on day one is far cheaper than finding it under 22,000 pounds of standing water later. Buyers put tanks this size to work as rural fire-water reserves and water-reuse vessels; if fire protection is the driver, read our breakdown of fire-water reservoir design and NFPA 22 sizing discipline.
This tank ships LTL freight, quoted live to your ZIP code. Get a freight number in seconds with our Freight Cost Estimator, or call 866-418-1777 and we will build the quote with you.
