Ronco Plastics RV26W - 32 Gallon Plastic RV Water Tank (31.0" x 23.0" x 11.5")

The RV26W is the dense option: 32 gallons of fresh water in a 31 x 23 x 11.5 inch block, the shortest footprint in a family whose other members stretch four and five feet. Compact tanks suit vertical water bays, forward compartments, and any installation where the floor space is square rather than striped. Remarkably, the blank weighs only about 16 pounds, the lightest of the three by a wide margin, which makes solo installation genuinely easy.

It is a light-duty potable molding in Ronco's W series, FDA-compliant natural polyethylene with a translucent wall for visual level checks. Full weight demands respect regardless of the tank's own lightness: 32 gallons at 8.34 pounds per gallon is roughly 267 pounds concentrated on a compact footprint, so the floor under it needs real structure.

Its siblings hold identical water in stretched form, the RV69W at 48 x 20 x 8 inches and the RV52W at 60 x 16 x 8, so measure before choosing. All three come from Tustin, California, where Ronco Plastics has rotomolded since 1974, with spin-weld or threaded fittings installed to the marks you make on the printable drawing below, or the picks you place in the fitting planner. The complete line is at RV water tanks. OneSource Plastics is an authorized Ronco Plastics dealer.

Technical drawing: download the Ronco Plastics RV26W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.