Ronco Plastics RV69W - 32 Gallon Plastic RV Water Tank (48.0" x 20.0" x 8.0")

Four feet long and eight inches tall, the RV69W is what 32 gallons of fresh water looks like when it has to disappear under a bed platform. The 48 x 20 x 8 inch envelope is the middle path of Ronco's three-tank 32 gallon family: not as extreme as the five-foot RV52W at 60 x 16 x 8, not as boxy as the RV26W at 31 x 23 x 11.5. Three shapes, one capacity; the compartment picks.

It is a W-series potable tank, rotomolded in FDA-compliant natural polyethylene with the translucent wall that lets you check your water at a glance instead of trusting a sender. The blank runs about 68 pounds. Full, it carries roughly 267 pounds at 8.34 pounds per gallon across its four-foot span, so give the base continuous support.

One size down sits the RV24W at 43 x 16 x 10.5; the whole potable range is at RV water tanks. One Source Plastics is an authorized Ronco Plastics dealer.

Standard fitting package

Choose the standard fitting package for $30 and we install these three fittings before the tank ships:

Want to place the fittings yourself? Choose the blank tank: it ships with no fittings at no charge. Add the 90-2218 fitting kit ($55.75). It includes an access plate with six stainless steel screws, washers and nuts to mount it, a 1-1/2" NPT plug, two 1/2" NPT plugs, two 5/8" thru-hull fittings for supply and vent, and one 1-1/2" thru-hull fitting for fill.

Technical drawing: download the Ronco Plastics RV69W dimensional drawing - print it to plan your install. Choose the standard fitting package (shown in the fitting layout image), or order the tank blank and place your own fittings.