Twelve inches of height is the number that sells the RV2W. Plenty of underfloor cavities and bench bases will not take a 15 or 16 inch tank; this one spreads its 35 gallons across a 37.5 x 19 inch footprint and stays at 12 inches, keeping the fresh water supply low in the chassis where the weight belongs anyway.
Ronco's sheet lists it as the 2W L.D. - light-duty potable, molded in natural FDA-compliant polyethylene with the translucent wall that lets you eyeball your remaining water. At 8.34 lb per gallon, a full load is roughly 292 lb, so this tank noticeably steadies a coach when it rides low and centered.
Its two 35-gallon siblings trade footprint for height: the RV1W is 19.5 inches wide and 15 inches tall, and the RV34W stacks up to 16 inches on a 33.5 x 19 inch base. A step longer and lower still is the 36-gallon RV38W at 45 x 18.5 x 11.25 inches. Compare the whole line at RV water tanks. The molding arrives with fittings installed per order - spin-welded or threaded wherever you mark them. Print the drawing below, mark your fill, vent, outlet, and sender locations, and the Tustin, California shop that has rotomolded since 1974 does the rest.
OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics RV2W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
