Skip to main content

Ronco Plastics

Ronco Plastics RV45W - 35 Gallon Plastic RV Water Tank

$498.26
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
RV45W
Weight:
18.00 LBS
Width:
22.00 (in)
Height:
13.00 (in)
Depth:
34.00 (in)
Series:
RV Water Tanks
Capacity:
35 Gallons
Ship Weight:
18 lb
Water Weight When Full:
292 lb
Fittings:
installed per order: spin-weld or threaded, located to customer spec; drawings show the blank molding
Ships From (FOB):
Tustin, California (FOB 92780, 15022 Parkway Loop)
Technical Drawing:
/content/ronco-drawings/RV45W.gif
Ship Dimensions:
34" L x 22" W x 13" H (crated)
Certifications:
FDA Approved
Material:
Low Density Linear Polyethylene

The RV45W is a 35-gallon fresh water tank molded in natural, FDA-compliant polyethylene - the translucent light-duty resin Ronco reserves for potable service. That translucency is a working feature, not a cosmetic one: you can see the water level through the wall with a flashlight, which matters when the sender fails halfway through a two-week trip.

Ronco's maker sheet lists this shell as the 45W at 35 gallons, and its dimensions live on the technical drawing below - print it, tape it into your bay if you like, and confirm clearance before ordering. If the outline does not suit, three other 35-gallon fresh shapes exist: the RV34W at 33.5 x 19 x 16 inches, the RV1W at 19.5 inches wide and 15 inches tall, and the RV2W at 37.5 x 19 x 12 inches. The rest of the family is at RV water tanks.

Plan mounting for the full load, not the empty one: at 8.34 lb per gallon, 35 gallons is roughly 292 lb of water riding on your floor structure, while the empty shell weighs just 18 lb. Ronco spin-welds or threads your fill, vent, outlet, and sender fittings per order, located to the marks you make on the drawing - a service they have run out of Tustin, California since 1974.

OneSource Plastics is an authorized Ronco Plastics dealer.

Technical drawing: download the Ronco Plastics RV45W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.

Freight

LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.

See this tank

Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).

Ready to order?

Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.

Adding to cart… The item has been added