The Enduraplas 1350 Gallon White Vertical Storage Tank is a polyethylene vertical storage tank built for bulk water and liquid storage where you need real capacity without sprawling across your site. It carries a 1,350 gallon rating, molded in Natural White, and is rated to a 1.9 specific gravity, which gives you headroom well beyond plain water. Listed at the price shown above, before freight. Before it leaves the plant you can plan your pad and clearance against published dimensions: the tank measures 71 inches tall on an 85 by 85 inch footprint.
Will it work for your site?
Full of water, this tank weighs about 11,259 pounds, so your slab and ground prep have to carry that load plus the tank's own weight. The 1.9 SG rating is the real capability lever here: the wall is built to hold contents up to a maximum rated weight of roughly 21,392 pounds, which means this same tank handles heavier-than-water liquids up to 1.9 specific gravity without stepping up to a different model. For straight water service that headroom simply translates to a long, conservative service life rather than a wall working at its limit. Confirm the 85 by 85 inch footprint clears your equipment and that your pad is level and rated for the full weight before you set it. If you are still working out the right size for your draw and refill cycle, run the numbers with the Tank Sizing Calculator and read the Tank Sizing Guide before you commit. Check the technical drawing on this page to confirm the outlet, fill, and vent locations match your plumbing run.
Sizing it into a real system
A 1,350 gallon vertical tank is a common reservoir size for rural and remote water storage, and it slots cleanly into larger storage trains. If you are designing private fire protection, our guide on fire-water reservoir tank design for rural and remote sites walks through NFPA 22 sizing discipline and freeze protection for cold-climate service. For reuse setups, the industrial water reuse tank topology guide covers banding grey-water, rainwater, and condensate into quality-tiered storage.
Setting it on the right pad
With a full-water weight north of 11,000 pounds, the foundation matters as much as the tank. Our writeup on concrete pad sizing for above-ground polyethylene tanks lays out the ACI 360R-10 framework and where the ACI 318 boundary falls, so your slab is sized for the real load rather than a guess.
This white vertical storage tank ships LTL freight, quoted live to your ZIP from whichever Enduraplas plant in our network sits nearer your site: Converse, TX or Neche, ND. Origin choice moves the number on a footprint this size, so get an exact figure with the Freight Cost Estimator, or call us at 866-418-1777 and we will quote it, confirm lead time, and help you spec the outlet and fittings you need.
