The Enduraplas 1750 Gallon Dark Green Vertical Water Storage Tank is a polyethylene vertical tank built for bulk water storage on farms, rural fire-protection sites, irrigation runs, and industrial water-reuse setups. It holds 1,750 gallons in an 85 x 85-inch footprint and stands 89 inches tall, so it banks a serious volume of water while still fitting under most barn eaves and equipment-shed rooflines. As a water-service tank, the dark green color is the right call for outdoor use: it cuts light penetration to slow algae growth in a tank that sits in the sun all season.
Will this tank work for your site?
This vertical water storage tank is rated to a specific gravity of 1.1, which means it covers plain water and moderately denser water-based contents up to that density, so a buyer storing something a bit heavier than water has real margin to work with. Filled with water at 8.34 lb per gallon, the contents weigh roughly 14,595 pounds; at the full 1.1 SG rating the contents can reach about 16,055 pounds. Size your foundation around the heavier number, not the water-only figure. A round vertical tank concentrates that load on its 85 x 85-inch footprint, so it needs a flat, fully supported pad. Confirm you have at least an 85 x 85-inch level pad plus working clearance around it, and roughly 89-plus inches of overhead, before the truck arrives - a quick pre-delivery measurement saves you from a refused LTL shipment. Our concrete pad sizing guide walks through the ACI 360R-10 framework for above-ground poly tanks, and the Tank Sizing Calculator and Tank Sizing Guide help you confirm 1,750 gallons is the right volume before you commit.
Fittings and the technical drawing
Refer to the technical drawing on this page for exact dimensions and fitting locations. Because the published fitting schedule is not detailed in our data for this tank, confirm the outlet, fill, and vent configuration plus any gasket material from that drawing before you order valves, bulkhead fittings, or other accessories - matching your plumbing to the actual port sizes up front prevents a second freight trip for the wrong parts.
How it ships
This tank ships LTL freight from the Enduraplas plant in Converse, Texas, with freight quoted live to your ZIP code. A 1,750-gallon vertical tank is a large, light-but-bulky load, so freight is priced by destination rather than baked into the list price; Texas and Gulf-region buyers sit on the shortest freight lane and generally see the most favorable LTL rates. Get an exact number with the Freight Cost Estimator, or call us at 866-418-1777 and we will quote it for you.
The mistake to avoid
The most common misstep on a tank this size is putting it into service without a proper acceptance fill. After it is set on a finished pad, run a controlled water fill and watch for pad settlement and any weeping at the fittings before you trust it with your full operating volume. Our hydrostatic test methodology guide lays out the fill discipline, hold-time math, and leak-detection steps. If you are sizing for rural fire protection, the fire-water reservoir design guide covers NFPA 22 sizing and cold-climate freeze protection, and for grey-water, rainwater, or HVAC condensate aggregation, see our industrial water reuse topology guide.
Ready to move on this Enduraplas vertical storage tank? Get your freight number with the Freight Cost Estimator or call 866-418-1777 to lock in your order. Listed price is before freight, which is quoted separately to your ZIP.
