The Enduraplas 1750 Gallon Green Vertical Storage Tank (SKU THV01750G) is a polyethylene vertical storage tank measuring 89 in tall on an 85 x 85 in footprint and holding 1,750 gallons. The green resin cuts light penetration to slow algae growth in outdoor service, and the upright profile keeps the footprint compact for a vertical tank of this capacity. This is the vessel you reach for when a single vertical tank needs to hold a large water reserve without spreading across the pad.
Will it work for your site?
Sizing this tank is a weight exercise before it is a volume exercise. Filled to full capacity with water, the contents weigh roughly 14,595 pounds - about 7.3 tons sitting on the pad - so the foundation, not the volume, is usually the deciding factor. The tank carries a 1.9 specific gravity rating, which is wall headroom rather than a chemical-service recommendation; for water storage the load that matters is that ~14,595-pound full-water figure. Run your draw-down and refill numbers through our Tank Sizing Calculator and read the Tank Sizing Guide to match this 1,750-gallon capacity to your actual demand. Because it is a tall vertical tank on a square footprint, a level, engineered base is not optional - our guide on concrete pad sizing for above-ground polyethylene tanks walks through the ACI framework for supporting a load this size.
Common water-storage uses
At 1,750 gallons, this vertical storage tank lands in the sweet spot for rural fire-water reserves, rainwater collection, industrial water reuse, and general bulk storage. If you are building a private fire-protection reserve, our write-up on fire-water reservoir tank design for rural and remote sites covers NFPA 22 sizing and freeze protection. For grey-water, rainwater, or HVAC condensate capture, see our overview of industrial water reuse tank topology, and rainwater harvesters should review first-flush diverter sizing from the Texas rainwater manual.
The mistake to avoid
Do not undersize the pad or skip anchoring on a tank of this height - a full vertical carrying over seven tons is unforgiving of an uneven or undersized base. Confirm your fitting configuration before delivery: check the technical drawing on this page for outlet and bulkhead locations, and if anything is unclear, confirm it with us at 866-418-1777 before the tank ships, since changing penetrations in the field is far harder than getting it right on paper.
This Enduraplas vertical storage tank ships LTL freight, quoted live to your ZIP from the nearest of our plants in Neche, ND or Converse, TX. Get a real number with the Freight Cost Estimator or call 866-418-1777 to lock in your order and delivery.
