The Enduraplas 2000 Gallon White Cone Bottom Tank with Stand (SKU THC02000KW) is a full-drain vessel built for processes where you need the tank to empty completely through the bottom apex. Molded in Natural White polyethylene and carried on its matching stand, it stands 113 inches tall on a 90-inch diameter footprint and weighs 500 pounds empty. It carries a 1.9 specific gravity rating and is FDA Approved, so it handles dense contents that would over-stress a standard 1.5-SG water tank.
Will it work for your process
The cone-bottom geometry means solids and slurries drain rather than settle, which is why buyers searching for a 2000 gallon cone bottom tank on a stand land here. Plumbing comes off a 3" PP (polypropylene) Female NPT bulkhead fitting at the outlet, and you fill and service through a 16" threaded vented manway up top. Size against real loaded weight, not just gallons: 2000 gallons of plain water weighs 16,680 pounds, and at the tank's full 1.9 SG rating the contents can reach 31,692 pounds. Your stand pad, anchoring, and any secondary containment must carry that loaded figure. The 90-inch diameter is the tank footprint; the overall stand width and length are not published, so request the drawing to confirm pad clearance and any doorway access. Run your product through the Tank Sizing Calculator and the Tank Sizing Guide before you commit, and see the technical drawing on this page for the outlet and manway placement.
Chemical compatibility
This tank is rated to 1.9 specific gravity, drawing on the Snyder Industries OEM chemical resistance chart. The resin is not yet confirmed — likely HDLPE (linear) but possibly XLPE (crosslinked) — so confirm which one before you put this tank into chemical service, because the two behave differently against certain oxidizers. Compatibility is always concentration- and temperature-specific, so verify your exact chemical, concentration, temperature, and both fitting and gasket materials against the chart. At 1.9 SG this is the top-rated poly option — nothing steps up from here — so for the heavy oxidizers and acids below there is no lighter substitute: Hydrochloric Acid (37%, PVC fitting, Viton gasket), Sulfuric Acid (98%, CPVC fitting, Viton gasket), Hydrogen Peroxide (50%, PVC, Viton), Sodium Hypochlorite (below 16.5%, PVC, Viton), Ferric Chloride (50%, PVC, EPDM), Phosphoric Acid (85%, PVC, Viton), Hydrofluoric Acid (48%, PP/PVC, Viton), Ethylene Glycol (100%, PVC, EPDM), Potassium Hydroxide (saturated, PVC, EPDM), and Peracetic Acid (30%, 316SS, Aflas), among others. Lower-SG-rated products such as DEF (32.5%, 316SS, EPDM) and Calcium Chloride (40%, PVC, EPDM) are also covered. Two callouts are easy to miss: Peracetic Acid needs an Aflas gasket — not the Viton or EPDM most acids call for — and 98% Sulfuric Acid needs a CPVC fitting where every other acid here runs PVC or PP. The tank ships with the 3" PP bulkhead and 16" vented manway only; the PVC/CPVC/316SS fittings and Viton/EPDM/Aflas gaskets your chemical requires are sourced separately, so match them to the chart before install — the wrong gasket elastomer is the most common failure on an otherwise compatible tank. Full data is in our Chemical Compatibility Database.
Stand and freight
Because this is a cone-bottom tank sold with a stand, the stand rating and the tank's loaded weight have to line up — our stand selection decision tree and the Enduraplas stand compatibility matrix walk through steel versus poly for this class of tank. This tank ships LTL freight from the nearest Enduraplas plant — Converse, TX or Neche, ND — quoted live to your ZIP. Get a number in seconds with the Freight Cost Estimator, or call 866-418-1777 to confirm the resin grade, fitting layout, and delivery for your application before you order.
