The Enduraplas 5050 gallon beige vertical tank is a 120-inch-tall polyethylene water storage tank built for high-volume bulk storage where one large vessel beats a row of smaller ones. It carries a 120 by 120 inch round footprint, holds 5,050 gallons, and is rated to a 1.1 specific gravity, so it is built to hold water and other contents up to that density without exceeding the shell's design limits. If you have searched for a beige Enduraplas vertical water storage tank in this class, this is the bulk water storage tank that fits that requirement.
Will it work for your site
Plan the slab before the tank arrives. Filled with water, this tank weighs about 42,117 pounds, and at its maximum rated contents it reaches roughly 46,329 pounds. That load sits on a 120 by 120 inch footprint, so the pad has to carry well over 20 tons concentrated on a 10-foot circle. Size and pour the foundation accordingly, and review our concrete pad sizing guide before you set the forms. To confirm 5,050 gallons is the right volume for your demand and refill cycle, run the numbers through our Tank Sizing Calculator or read the Tank Sizing Guide. Fitting configuration on a tank this size is confirmed at order, so call 866-418-1777 to lock the inlet, outlet, manway, and vent layout before you plumb it.
Common applications and the mistake to avoid
At this capacity the tank earns its keep as a fire-water reservoir, an industrial water reuse or rainwater aggregation vessel, or a bulk water buffer. If you are stocking it as a private fire-protection reserve, size the usable volume against your design demand rather than the nominal capacity, which our fire-water reservoir design guide walks through, and plan freeze protection for cold climates. For grey-water, rainwater, or HVAC condensate reuse, our water reuse topology guide covers staging multiple quality bands. The biggest mistake at this scale is treating the 1.1 specific gravity rating as a margin for heavy chemical service. It is not. This tank is rated for water and contents up to 1.1 SG; standard gaskets are rated for water, so any non-water contents within that 1.1 limit require gasket-material verification before fill. If your contents exceed 1.1 specific gravity, this tank is not rated for that service, and you should call 866-418-1777 to spec a higher-rated tank rather than overfill the design.
Commissioning
Once the tank is on its pad, fill it with water and watch for pad settlement and fitting leaks before you trust it. Our hydrostatic test methodology guide covers the fill discipline, settlement monitoring, and hold-time math for a clean acceptance test.
Ships LTL freight from the Converse, Texas plant, so factor lane distance to your ZIP. At 120 inches wide and 120 inches tall this is an oversize load, so confirm site access and unloading equipment to set the empty but bulky tank when you pull your quote. Get your freight number from our Freight Cost Estimator, or call 866-418-1777 and we will work it out with you. Listed at the price shown on this page, before freight.
