Norwesco 1800 Gallon Connecting Bar

The Norwesco N-63653 is a steel connecting bar in the Mounting Hardware class — a rigid link that ties tank components together, not a tank or liquid-holding vessel itself. It measures 33 inches long by 2 inches wide by 2 inches high and weighs about 3 pounds. The "1800 Gallon" in the name refers to the Norwesco tank family this bar fits, not a capacity of the bar itself. If you are searching for a "norwesco connecting bar" to complete or service an existing 1800-gallon installation, this is the part-level hardware that keeps the assembly aligned and secured.

Will this work for my setup?

Fit here is purely dimensional. This is a Norwesco-brand connecting bar fabricated from steel, with a functional footprint of 2.0 x 33.0 inches. Because it is mounting hardware and not a pressure- or liquid-contact part, there is nothing chemical to match — no gallon capacity, no specific-gravity rating, no resin grade, and no fittings or gaskets to cross-reference. There is also no higher-rated variant to step up to; the only question that matters is whether the 33-inch span and the 2 x 2-inch bar profile line up with the mounting points on your Norwesco setup. Cross-check that length and profile against your actual tank hardware before ordering. One note on our data: color and finish are not specified for this item, so confirm coating or finish with us at 866-418-1777 if that matters for your install. If you are still validating the storage side of the system this part belongs to, our Tank Sizing Calculator and Tank Sizing Guide will help you verify the parent tank arrangement.

The mistake to avoid

The common error with a component like this is treating it as a universal part. It is a specific 33-inch steel bar sized for a particular Norwesco 1800-gallon configuration, so ordering by name alone — without checking the 33-inch length and 2-inch profile against your actual mounting points — is how the wrong hardware ends up on site. Measure first, then order. Steel construction also means it belongs in the mechanical mounting role it was built for; keep it in that structural service rather than substituting it into a wet or chemical-contact position it was never intended for.

Freight

The N-63653 ships by LTL freight from Ohio, quoted live to your ZIP. At roughly 3 pounds this is a small hardware item, so the practical move is to add this bar to the same LTL order as the tank or components it mates to — that way you are not paying a separate freight minimum on a 3-pound part. Get an exact number through our Freight Cost Estimator or call 866-418-1777 to have it quoted alongside the rest of your order.