Skip to main content

Norwesco

Norwesco 2000 Gallon Dark Green Vertical Water Storage Tank

$2,399.00
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
44131
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
290.00 LBS
Width:
90.00 (in)
Height:
84.00 (in)
Depth:
90.00 (in)
Capacity:
2000 Gallons
Material:
Polyethylene
Color:
Dark Green
Diameter:
90"
Inlet:
1-1/2" PP Female NPT Bulkhead Fitting
Outlet:
2" PP Female NPT Bulkhead Fitting
Lid/Manway:
16" Threaded Vented Manway
Specific Gravity:
1.0
Max Temperature:
120° F / 48° C
Certifications:
FDA Approved, NSF 61
Warranty:
3 Year Warranty
Freight Class:
400
Manufacturer Part Number:
44131
Manufacturer:
Norwesco
Technical Drawing:
https://onesourceplastics.com/content/tech-drawings/44131.pdf

The Norwesco 2000 gallon dark green vertical water storage tank is a polyethylene tank built for bulk water service - rural fire-water reserve, irrigation, rainwater collection, and grey-water or HVAC condensate aggregation. It holds 2,000 gallons on a 90 by 90 inch footprint, so it banks serious volume while still fitting a defined pad envelope. The dark green color cuts light penetration to slow algae growth in outdoor installs, which makes it a workable vertical storage tank for water you intend to keep clean over time.

Will this tank do the job?

This is a 1.0 specific gravity tank, rated for water and water-weight liquids at up to 8.34 pounds per gallon. Filled to capacity, the contents weigh 16,680 pounds, which is also the maximum rated contents weight - so the foundation is the real engineering decision here, not the tank. That much load concentrated on a 90 by 90 inch base has to land on a level, fully supporting pad. Pull the true outside diameter and overall height from the technical drawing on this page rather than inferring them from the footprint, and read our concrete pad sizing guide for the ACI 360R-10 framework before you pour. If you are still confirming which capacity matches your draw and refill cycle, run the numbers in our Tank Sizing Calculator and check the Tank Sizing Guide. Outlet, fill, and lid configuration follow the technical drawing on this page - confirm those tie-in points before you finalize plumbing and overflow runs.

How this size fits the job

Two thousand gallons is a common pivot point for vertical storage tank duty: large enough to serve as a meaningful private fire-water reservoir or industrial water-reuse buffer, but still a single movable vessel rather than a multi-tank train. Whether you are banking a fire-water reserve, staging rainwater and HVAC condensate for reuse, or weighing this Norwesco against other brands at the same capacity, our use-case writeups cover the tradeoffs - start with the Snyder vs Norwesco vs Chem-Tainer 2000 gallon comparison if brand is your open question.

The mistake to avoid

This tank is rated to 1.0 specific gravity - it is a water tank. Do not use it for chemicals or any liquid heavier than water; a denser fluid exceeds the wall's design load, and a vessel rated for water service should not be repurposed for chemical storage. Confirm your stored liquid is water or water-equivalent before filling. The other common miss is treating the 90 by 90 footprint as final clearance - verify the as-built outside diameter and overall height from the technical drawing so your pad, anchoring, and overhead clearance all fit the real envelope.

This Norwesco 2000 gallon vertical water storage tank ships LTL freight from the Washougal, WA plant, quoted live to your ZIP. A full-class tank like this carries real cross-country freight, so get a delivered-to-your-ZIP estimate up front with our Freight Cost Estimator, or call 866-418-1777 and our team will quote freight, confirm specs, and help you stage your install.

Adding to cart… The item has been added