The RV6W is the long way to carry 36 gallons of fresh water: 48.38 inches of length against a slim 14.38 inch width, standing 13.25 inches tall. That proportion is made for chase-frame gaps - alongside a driveshaft tunnel, between a frame rail and a holding tank, down the spine of a trailer where nothing squarish will go.
It is a light-duty potable molding in natural FDA-compliant polyethylene, translucent enough to read water level through the wall. Ronco's own sheet carries it as the 6W L.D., one of the original numbered molds from a library that has been growing in Tustin, California since 1974.
The full-water number to respect is 300 lb (36 gallons at 8.34 lb per gallon) distributed along that narrow footprint, so support it along its length rather than at the ends. If your cavity is squarer, the RV7W holds the same 36 gallons at 30 x 22 x 14 inches; in between sits the RV38W at 45 x 18.5 x 11.25 inches, and longer still the 38-gallon RV53W at 70 x 16 x 8 inches. Full range at RV water tanks. Fittings are installed per order - print the drawing below, mark your fitting locations, and they arrive spin-welded or threaded in place.
OneSource Plastics is an authorized Ronco Plastics dealer.
Technical drawing: download the Ronco Plastics RV6W dimensional drawing - print it to plan your install and mark exactly where you want fittings located; Ronco installs spin-weld or threaded fittings to your marked spec.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
