The Enduraplas 5200 Gallon Plastic Vertical Water Storage Tank (SKU TLV05200) is a full-size bulk vertical for rural fire-water reserves, irrigation supply, water reuse trains, and general bulk water storage where you need serious volume in a compact square footprint. It stands 164 inches tall on a 100 x 100 inch base, so it holds 5,200 gallons without spreading across the yard. The dimensions on this listing are verified against the launch drawing, and the technical drawing on this page shows the tank profile and fitting layout.
Will this tank work for my site?
Sizing is where most vertical-tank buyers get surprised. Filled with water, this tank carries 43,368 pounds sitting on that 100 x 100 inch footprint. That load has to land on a properly engineered pad, not bare soil or a slab poured for a smaller tank. Work the pad math before you order it: our Concrete Pad Sizing for Above-Ground Polyethylene Tanks guide walks the ACI 360R-10 framework, and the Tank Sizing Calculator and Tank Sizing Guide help you confirm 5,200 gallons is the right band for your draw rate. If this is a private fire-protection reserve, the NFPA 22 reservoir design guide covers the sizing discipline and cold-climate freeze protection this large a body of water demands.
Fittings and access
Per the technical drawing, this tank is configured with three provisions: a 3 inch bolted fitting, a 16 inch access lid, and a 2 inch threaded fitting. Let the drawing on this page assign which port serves fill and which serves draw, and confirm every fitting height and orientation before you plumb your manifold. The 3 inch bolted fitting is a flanged, bolted connection, so verify the gasket and bolt-hardware requirements against the drawing before you seal that port. For grey-water, rainwater, or condensate aggregation setups, our water reuse tank topology guide shows how a body this size fits into a quality-banded storage train.
Specific gravity and service limits
This listing is speced for water service at 1.0 specific gravity, and the 43,368 pound full-water weight above reflects that. We have not published a higher specific-gravity rating for this body, so call 866-418-1777 before storing anything denser than water. Do not assume a water tank will hold a heavier liquid without confirmation.
Before you put it in service
Do not skip the acceptance test on a tank this large. A first fill on a settling pad is the moment leaks and fitting problems show up, so run a proper hydrostatic hold before you trust the reserve. Our Hydrostatic Test Methodology guide covers water-fill discipline, pad-settlement monitoring, and hold-time math for new-install acceptance.
This is an LTL freight item. Freight is quoted live to your delivery ZIP through our Freight Cost Estimator so you see real numbers, not a placeholder. For help confirming fittings, pad requirements, or the fastest ship-from point for a tank this size, call us at 866-418-1777.
