The Enduraplas 700 Gallon Vertical Water Storage Tank (SKU TC6460IW-GREEN) is a green, above-ground polyethylene tank built for bulk water holding on farms, rural fire-water reserves, irrigation setups, and industrial process or reuse trains. It carries a full 700 gallons in a low-profile vertical shape: a wide, short body that keeps the center of gravity down and fits under low ceilings, eaves, and roof overhangs where a taller vertical would not clear. If you are matching a tank to a specific draw rate or reserve target, this is a mid-size vertical that gives you real volume without the height.
Will it work for your site
The tank stands 60 inches tall on a 64 x 64 inch footprint (64 inches wide by 64 inches long), so plan a level pad at least that size plus working clearance around the base. Dimensions here are verified against the tank's launch record, and you can confirm the profile against the technical drawing on this page. The number that governs your foundation is weight: 700 gallons of water alone comes to about 5,840 pounds bearing straight down on the pad. Add the empty tank weight for total pad load. That water load drives your pad design far more than the shell does. Before you pour, work through the pad math with our concrete pad sizing guide, and if you are still deciding on capacity, the Tank Sizing Calculator and Tank Sizing Guide will help you right-size before you buy.
Water service and install
This is a water-storage tank, well suited to bulk water holding, rainwater and grey-water aggregation, and rural fire reserves. For fire-protection duty, size the reserve against your demand using our NFPA 22 reservoir design guide; for reuse and condensate-capture builds, the water-reuse topology guide walks the storage-train layout. The most common mistake on a new vertical install is skipping acceptance testing: fill it with water and hold it before you commit the system, watching for pad settlement and fitting weep. Our hydrostatic test methodology lays out the hold-time math step by step. Fitting and bulkhead configuration varies by build, so call 866-418-1777 to confirm the outlet and lid setup that ships with this tank.
This tank ships LTL freight on a pallet, with freight quoted live to your delivery ZIP rather than folded into the list price. Get a freight number in seconds with our Freight Cost Estimator, or call 866-418-1777 and we will confirm dimensions, lead time, and the best routing for your address.
Freight
LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
