The Enduraplas TLV10000DG is a 10,000-gallon vertical water storage tank molded in dark green polyethylene, built for high-volume bulk water storage where a single large reservoir beats a bank of smaller tanks. It stands 178 inches tall (roughly 14.8 feet) on a 144 x 144 inch footprint, so it answers the first buyer question plainly: it holds the volume, but you need to confirm both pad capacity and overhead clearance before it arrives. Check that 178-inch height against doorways, eaves, and overhead power lines on the delivery route and at the final site. This is the tank people reach for when they search for an enduraplas water storage tank, a vertical storage tank, or simply a large vertical tank for rural, agricultural, fire-reserve, or industrial water supply.
Will it work for your site
The tank carries a 1.1 specific gravity rating, which suits water and water-based contents up to that density. Plan the foundation around the loaded weight, not the empty shell: at a full water fill the tank and contents reach roughly 83,400 lb, and the manufacturer's maximum rated contents weight is 91,740 lb. That is over 40 tons sitting on a 12-foot square footprint, so the pad has to be engineered for it. Our Concrete Pad Sizing guide walks through the ACI 360R-10 framework for above-ground polyethylene tanks of this scale. Use the Tank Sizing Calculator and Tank Sizing Guide to confirm 10,000 gallons is the right capacity before you commit. Fitting sizes and locations are shown on the technical drawing on this page; confirm thread type and gasket against your plumbing before you order any couplers.
Common mistakes to avoid
The 1.1 specific gravity rating is the number that trips people up. It is matched to water; do not assume it covers heavier liquids without confirming the contents density against the rating first. The second mistake is skipping acceptance testing on a tank this large. Before you put it into service, follow a disciplined fill: our Hydrostatic Test Methodology guide covers staged water fill, pad-settlement monitoring, fitting leak detection, and hold-time math so you catch a problem before the reservoir is relied upon. The third is booking offload without the right equipment: the empty shipping weight is not the loaded weight, so confirm the actual shipping weight with us before you schedule a crane or forklift on delivery day.
Where it fits in a larger water system
At this volume the tank often anchors a bigger plan. For rural and remote fire protection, our Fire-Water Reservoir Tank Design guide covers NFPA 22 sizing discipline and freeze protection for cold-climate service. If you are aggregating grey water, rainwater, or HVAC condensate, the Industrial Water Reuse Tank Topology guide shows how a tank this size fits a quality-banded storage train.
This tank ships LTL freight from the Enduraplas plant in Converse, TX, quoted live to your ZIP. Get an exact number with our Freight Cost Estimator, or call 866-418-1777 to talk through delivery, offload, and siting for a tank this size before you order.
