The Enduraplas 10000 Gallon Green Vertical Storage Tank (SKU THV10000G) is a polyethylene bulk-water vertical built for large-volume storage where you need a lot of gallons on a compact square footprint. It stands 178 inches tall - just under 15 feet - on a 144 x 144 inch base, holding 10,000 gallons in a single green vertical tank.
Will it work for your site?
This is a water-service vertical rated to a specific gravity of 1.9, so the polyethylene wall carries a wide margin over plain water at SG 1.0. In practical terms, the tank can hold liquids up to about 1.9 times the density of water - up to a maximum rated contents weight of 158,460 pounds - so it is not limited to plain water even though it is sold in water service. A full load of water alone weighs 83,400 pounds, and those two numbers drive your foundation: at 144 x 144 inches of footprint, a full load puts real bearing pressure on the pad, so this tank needs a properly engineered slab. Work through our concrete pad sizing guide before you pour, and use the Tank Sizing Calculator and Tank Sizing Guide to confirm 10,000 gallons matches your draw rate. At nearly 15 feet tall, plan overhead clearance and delivery access before the truck arrives. For fitting locations and outlet detail, see the technical drawing on this page, or confirm the outlet configuration by calling 866-418-1777.
Common uses and the mistake to avoid
A vertical storage tank this size is a workhorse for rural and remote fire-water reservoirs, irrigation supply, and industrial water reuse trains. If fire protection is the job, size the reservoir to your standard, not just the tank's rating - our fire-water reservoir design guide walks the NFPA 22 sizing discipline and cold-climate freeze protection. For grey-water, rainwater, and HVAC condensate aggregation, the industrial water reuse topology guide covers quality-banded storage. The mistake to avoid on a 10,000-gallon vertical: skipping vent capacity math. A tank this size moves a lot of air as it fills and drains, and an undersized vent can pull a vacuum on the wall - see our API 2000 vent sizing worked examples, which run through 1,500 to 10,000 gallon verticals.
Freight and ordering
This vertical storage tank ships LTL freight, quoted live to your ZIP from the nearest Enduraplas plant - Converse, TX or Neche, ND. The North Dakota origin keeps northern-tier deliveries close for cold-climate sites. A tank this size is a dedicated load, so freight is priced per destination. Get your number from the Freight Cost Estimator or call 866-418-1777, and our team will route it from the closest plant to hold your freight cost down.
