The Enduraplas 200 Gallon Dark Green Vertical Water Storage Tank holds 200 gallons of fresh water in a compact 30 x 30 inch footprint that stands 79 inches tall, so you get usable on-site water storage without giving up much ground space. This vertical water storage tank is rotationally molded from polyethylene in dark green and is built for outdoor water storage. It is rated to a 1.1 specific gravity, the correct band for water and water-based contents at this size.
Will it work for your site?
The tank measures 79 inches high on a 30 x 30 inch base. Filled with water at full capacity it carries roughly 1,668 pounds, and it is rated to a maximum contents weight of 1,835 pounds. That 167-pound gap is your "heavier-than-water" allowance: it is the headroom that the 1.1 specific gravity rating buys you over plain water at 1.0. Size your pad and hold-downs to the full 1,835-pound figure, not the 1,668-pound water weight, so your anchoring covers the tank at its rated ceiling. One hard limit to respect: this is a water tank rated to 1.1 specific gravity, so do not put anything denser than 1.1 SG in it. If you are still choosing between sizes, run the numbers through our Tank Sizing Calculator and read the Tank Sizing Guide before you commit.
Setting it up the right way
A tall, small-diameter vertical storage tank like this one drives its full loaded weight onto a small area, so the pad underneath it does real work. A properly sized concrete pad keeps the base supported and the tank plumb over its service life; our guide on concrete pad sizing for above-ground polyethylene tanks walks through the framework. Once it is set, fill it with water before putting it into service and watch for pad settlement; the hydrostatic test methodology for new-install acceptance covers the fill discipline and hold-time math. Fitting and outlet configuration is not listed for this tank, so confirm the inlet, outlet, and lid arrangement by phone at 866-418-1777 before you plumb it.
Where it fits in your water system
At 200 gallons this is a practical size for fresh water storage feeding small rural, residential, agricultural, and remote setups. Because the tank is a tall 30-inch column rather than a squat shape, a cold-climate site has more exposed surface area per gallon, so plan freeze protection accordingly; the fire-water reservoir tank design guide covers reserve sizing and freeze-protection engineering for cold-climate service. If your storage is part of a larger plan, the industrial water reuse topology guide shows how vertical storage tanks like this one slot into grey-water, rainwater, and condensate aggregation trains.
This 200 gallon water storage tank ships LTL freight from the Enduraplas plant in Converse, TX, with the rate quoted live to your ZIP code. On a tank this size, freight from a single Texas ship-point is the dominant cost variable, so pull a ZIP quote before you compare list prices: get your number in seconds with our Freight Cost Estimator, or call 866-418-1777 and we will quote it for you and help confirm the right tank for your water storage job.
