The Enduraplas 200 gallon beige vertical water storage tank gives you a compact storage footprint where floor space is tight: it stands 79 inches tall on a 30 by 30 inch base. That tall, narrow geometry is the reason this size is a workhorse for vertical water storage in garages, well houses, pump sheds, and tucked-in corners of a rural water setup. It holds 200 gallons in beige polyethylene with a 1.1 specific gravity rating.
Quick specs
- Capacity: 200 gallon nominal
- Dimensions: 79 in H x 30 in W x 30 in L (30.0 x 30.0 in footprint)
- Material: Beige polyethylene
- Specific gravity rating: 1.1
- Full water weight: ~1,668 lb
- Max rated contents weight: 1,835 lb
- Ships from: Converse, TX (LTL freight)
Will it work for your job?
This is a vertical water storage tank built in polyethylene and rated to a 1.1 specific gravity ceiling - suitable for water and light solutions. For anything denser than that, step up to a higher-SG-rated body; run the numbers in our Tank Sizing Calculator and read the Tank Sizing Guide before you commit to a size. Plan your pad and plumbing around the loaded weight, not the empty shell. The 1,668 lb figure is a full water load at SG 1.0; the 1,835 lb max-contents rating reflects the 1.1 SG ceiling, so size your pad to the higher number. That full load concentrates on a 30 by 30 inch base, so the slab matters more than the gallon count suggests. Outlet, lid, and bulkhead fitting details for this tank are not yet confirmed in our records - call 866-418-1777 to verify the connection points before you plumb it.
Set it on the right pad
A vertical tank this tall is only as stable as what it sits on. Because the loaded weight lands on a 30 by 30 inch footprint, an under-built or out-of-level base is the most common install mistake we see. Pour a flat, fully supported slab sized to the 1,835 lb load - our guide on concrete pad sizing for above-ground polyethylene tanks walks through the ACI 360R-10 framework. After install, fill and check before you rely on it: the hydrostatic test methodology covers water-fill discipline, pad-settlement monitoring, and fitting-leak detection so you catch a problem at acceptance and not months later. You can confirm dimensions against the technical drawing on this page before you frame anything around it.
Common applications
As a 200 gallon vertical water storage tank, this beige body suits well-water buffering, hauled-water storage, irrigation supply, and rural fire-water reserve. If a private fire-protection reserve is your use case, the fire-water reservoir design guide covers NFPA 22 sizing discipline and freeze protection for cold-climate service. For grey-water, rainwater, or HVAC condensate aggregation, our water reuse tank topology guide shows how a body this size fits a quality-banded storage train.
This water storage tank ships LTL freight from the Enduraplas plant in Converse, TX, with the rate quoted live to your ZIP - get your number from the Freight Cost Estimator or call 866-418-1777. Because freight is quoted to your delivery point, a buyer near Texas will see a very different number than one across the country, so estimate before you order. Stock and lead time are confirmed at the time of order - call us at 866-418-1777 and we will spec the right setup for your site.
