The Enduraplas 2520 gallon vertical storage tank is a natural white polyethylene tank built for bulk water storage where you need real capacity in a stable, wide-stance package. Key specs: 2,520 gallon capacity, 86 in H x 110 in W x 110 in L, on a 110 x 110 in footprint, polyethylene wall rated to 1.9 specific gravity. The low, wide stance fills a corner or pad without the tip risk of a tall, narrow tank, which makes it a practical vertical storage tank for rural water, hauled-water supply, fire reserve, irrigation, and industrial process water.
Will it work for your site?
Start with weight, because water is heavier than most people plan for. Filled with fresh water this tank carries roughly 21,017 pounds of contents, and the pad or ground underneath has to support that load plus the tank itself. The 110 x 110 in footprint spreads the load, but the surface still needs to be flat, level, and fully supporting across the entire base. Because the wall is rated to a 1.9 specific gravity, this tank is not limited to plain water: it can hold denser liquids up to about 39,932 pounds of maximum rated contents, so there is real headroom if you are weighing a heavier-fluid service down the road. The natural white translucent wall also lets you eyeball the liquid level at a glance. If you are still sizing capacity or checking how the footprint fits your space, run the numbers with our Tank Sizing Calculator and the Tank Sizing Guide before you commit.
Getting the pad and setup right
A tank this size lives or dies on its foundation. With more than ten tons of water landing on one spot, the pad matters as much as the tank. Our guide on concrete pad sizing for above-ground polyethylene tanks walks through the ACI framework for sizing that base correctly. If this tank is going into a rural or remote fire-water reserve, the fire-water reservoir tank design guide covers NFPA 22 sizing discipline and cold-climate freeze protection, both of which shape how you size and site a white vertical storage tank like this one.
The mistake to avoid
The most common error on a large vertical tank is trusting an unprepared surface. A base that is soft on one side, sloped, or only partially supporting the footprint will stress the tank wall under the roughly 21,017 pounds of fresh water it holds, and far more at its rated 39,932-pound ceiling. Prepare the full 110 x 110 in footprint on a level, load-rated pad before the first fill, and never move this tank with liquid in it. Fitting sizes and inlet/outlet locations are not published in our specs for this SKU, so review the technical drawing on this page and call 866-418-1777 to confirm the fitting plan matches your plumbing layout before you order.
This tank ships by LTL freight from the Enduraplas plant in Neche, ND, with freight quoted live to your ZIP. Get an exact number with our Freight Cost Estimator, or call 866-418-1777 and we will line up the quote and answer any sizing questions before you buy.
