The Enduraplas 2600 Gallon Beige Vertical Water Storage Tank is a polyethylene bulk-water tank built for above-ground water, irrigation, fire-reserve, and reuse storage where you need real volume on a compact pad. It ships LTL from the Converse, TX plant, so South-Central buyers stay close to the freight origin. It stands 92 inches tall on a 100 x 100 inch footprint and holds 2,600 gallons, so a single vertical storage tank covers a lot of water storage without sprawling across the site. The beige color is the practical choice for outdoor water storage: it blocks light to slow algae growth while staying neutral against most rural and commercial backdrops.
- Capacity: 2,600 gallons
- Height: 92 in
- Footprint: 100 x 100 in
- Full-water weight: 21,684 lb
- Max-rated contents weight: 23,852 lb
- Specific gravity rating: 1.1
- Color / material: Beige polyethylene
Will it hold your water
This vertical water storage tank is rated to a specific gravity of 1.1, which comfortably covers water (SG 1.0) and gives you headroom for water-based solutions slightly denser than plain water. Plan your pad and plumbing around the loaded weight, not the empty shell: filled with water this tank carries about 21,684 pounds, and at its maximum rated contents it reaches roughly 23,852 pounds. That weight lands on a 100 x 100 inch footprint, so the supporting surface has to be flat, fully continuous, and engineered for the load. If you are still deciding between sizes, the Tank Sizing Calculator and Tank Sizing Guide help you match capacity to your draw rate and refill schedule before you commit.
Set it on the right pad and test it
A tank this size is only as good as what it sits on. A poured pad sized for the loaded weight keeps the base flat and prevents the settlement that stresses fittings over time - our guide on concrete pad sizing for above-ground polyethylene tanks walks through the ACI 360R-10 framework and where the ACI 318 boundary sits. Once it is set, fill it with water and watch it before you put it into service: the hydrostatic test methodology for new-install tank acceptance covers the water-fill discipline, pad-settlement monitoring, and hold-time math that confirm the install before it matters.
The mistake to avoid
The most common error on a tank this size is treating the empty weight as the install number. It is not - the loaded tank pushes well over ten tons onto a small square of ground, so undersizing the pad or setting it on uneven fill is what cracks fittings and tips tanks. Fitting sizes and placement are shown on the technical drawing on this page; call 866-418-1777 to confirm them and lay out your inlet, outlet, and overflow with the loaded footprint in mind before you plumb anything.
Related guides
If this tank is part of a private fire-protection setup or a grey-water and rainwater reuse train, two guides show how it fits the larger stack: fire-water reservoir tank design for rural and remote sites and industrial water reuse tank topology.
This 2,600 gallon Enduraplas vertical water storage tank ships LTL freight from the Converse, TX plant, quoted live to your ZIP. Get your number in seconds with the Freight Cost Estimator, or call 866-418-1777 and we will quote it for you and help confirm this is the right vertical storage tank for your site.
