Enduraplas 6000 Gallon Green Vertical Storage Tank

The Enduraplas 6000 gallon green vertical storage tank (part THV06000G) is a heavy-duty polyethylene bulk vessel for large-scale water storage, standing 179 inches tall on a 110 by 110 inch footprint. That vertical profile stacks a big reservoir over a compact square base, which is exactly what buyers searching for a 6000 gallon vertical storage tank need when yard space is tight but capacity is not. It is molded in green polyethylene for outdoor, non-potable water service.

Will it work for your site?

This tank holds 6000 gallons and carries a 1.9 specific gravity rating. For a water buyer the number that matters is the full-water load: filled with water it weighs roughly 50,040 lb, and that is your pad design figure. The 1.9 SG rating means the shell itself can hold up to about 95,076 lb of contents if you ever store a liquid that dense, but reaching that ceiling depends on the outlet and gasket materials being rated to the liquid and the head, and no fittings are specified in this listing, so any denser-than-water service should be spec'd and quoted separately. Confirm your volume with the Tank Sizing Calculator and Tank Sizing Guide, and see the technical drawing on this page for dimensional detail.

Foundation and siting

The base is the most common place buyers under-build a tank this size. A 179-inch-tall vessel on a 110 by 110 pad has a high center of gravity when loaded, so the pad must be level, full-load rated, and sized for wind and seismic siting, not just the tank's floor area. Our concrete pad sizing guide walks through the ACI framework for above-ground polyethylene tanks. A 6000 gallon vertical tank is a workhorse for rural fire-water reservoirs, irrigation supply, and industrial water reuse trains; for private fire protection read our fire-water reservoir design guide for NFPA 22 sizing and freeze protection, and for grey-water, rainwater, and condensate storage see our water reuse topology guide.

Freight

This tank ships by LTL freight from Enduraplas' plant in Neche, North Dakota, its single fulfillment origin, so transit distance to your ZIP drives the quote. Plan for forklift or crane offload given the 179-inch height and weight of an empty tank this size. Use the Freight Cost Estimator for a freight estimate to your ZIP, or call 866-418-1777 and we will quote it and confirm offload requirements. List price is shown before freight.