Skip to main content

Norwesco

Norwesco 120 Gallon Green (California Only) Vertical Water Storage Tank

$450.00
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
43862
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
32.00 LBS
Width:
38.00 (in)
Height:
31.00 (in)
Depth:
38.00 (in)
Capacity:
120 Gallons
Material:
Polyethylene
Color:
Black
Diameter:
D,E,G,L,T"
Inlet:
1-1/2" PP Female NPT Bulkhead Fitting
Outlet:
2" PP Female NPT Bulkhead Fitting
Lid/Manway:
5" Threaded Vented Lid
Specific Gravity:
1.0
Max Temperature:
120° F / 48° C
Certifications:
iapmo-certificate-2024-2029, csa-certificate, fda-resin-status-letter-2020
Warranty:
3-year limited (full replacement) per Norwesco liquid storage catalog 2024
Freight Class:
300
Manufacturer Part Number:
43862
Manufacturer:
Norwesco
Resin:
ExxonMobil HD8660 HDPE
Technical Drawing:
https://onesourceplastics.com/content/norwesco-technical-drawings/norwesco-120-gallon-green-california-only-vertical-water-storage-tank-43862.pdf

The Norwesco 120 Gallon Green (California Only) Vertical Water Storage Tank (MPN 43862) is a one-piece rotomolded high-density polyethylene tank engineered for above-ground potable and non-potable water storage in residential, agricultural, and rural municipal-water service.

Design

  • Self-supporting flat-bottom design — no internal bracing, no external support cage required
  • FDA-listed resin under 21 CFR 177.1520 for direct potable-water contact
  • Translucent natural-color option permits visible fill-level inspection without an external gauge
  • One-piece rotomolded construction — no welded seams, no bolted joints (failure paths in steel or fiberglass alternatives)
  • NSF/ANSI 61–listed resin certified for drinking-water-system component service

Installation

Set on a level concrete pad, compacted base ring, or 2x6 wood platform sized at least 6 inches wider than the tank diameter. A filled water column at 120 gallons exerts approximately 1,001 lb of point load — confirm the supporting structure meets this load case before commissioning. For wind-exposed installations or seismic IBC Risk Category III/IV jurisdictions, anchor the tank with steel strapping to a structural foundation per ASCE 7 Chapter 13 non-structural component anchorage requirements.

Common applications

  • Low-yield well storage cistern for residences experiencing seasonal drawdown
  • Livestock watering supply for cattle, equine, swine, sheep, and goat operations
  • Fire-protection auxiliary supply per NFPA 1142 for rural residential and small-commercial sites
  • Construction-site water staging for concrete mixing, dust suppression, and equipment wash-down
  • Rainwater harvesting downstream of gutter collection systems
  • Greenhouse and nursery irrigation buffer for drip and overhead systems

Compatibility & compliance

Rotomolded HDPE wall meets ASTM D1998 (Polyethylene Upright Storage Tanks for Storage of Aggressive Chemicals) for non-pressurized atmospheric service. NSF/ANSI 61 listing applies to drinking-water-system components when the OEM model carries the certification mark. Not rated for petroleum products, organic solvents, or liquids of specific gravity above 1.0 unless the tank is explicitly labeled for heavy-duty service.

Shipping

Ships LTL freight from the nearest manufacturing plant. ZIP-specific freight quotes are available through the freight estimator or by phoning 866-418-1777 with MPN 43862.

Adding to cart… The item has been added