Skip to main content

Norwesco

300 Gallon Vertical Liquid Storage Tank - Natural White

$650.00
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
N-42882
Availability:
In Stock - Ships from nearest Norwesco manufacturing plant
Weight:
34.00 LBS
Width:
42.00 (in)
Height:
58.00 (in)
Depth:
42.00 (in)
Diameter:
42"
Lid/Manway:
16"
Outlet:
2"
Specific Gravity:
1.5
Color:
White
Warranty:
3-year limited (full replacement) per Norwesco liquid storage catalog 2024
Capacity:
300 Gallons
Resin:
Polyethylene
Certifications:
iapmo-certificate-2024-2029, csa-certificate, fda-resin-status-letter-2020

The Norwesco 300 Gallon Vertical Liquid Storage Tank in natural white is a polyethylene vertical storage tank built for general-purpose liquid storage on farms, job sites, and water-supply setups. The natural-white wall lets you read the liquid level at a glance, and the 300-gallon capacity puts it in a footprint that handles water hauling, rainwater collection, and bulk water staging without dominating the pad. If you are weighing this against other Norwesco 300 gallon tank options, the questions below are the ones that actually decide the order.

Will it work for your application?

This is a 300-gallon vertical tank molded from polyethylene by Norwesco. The number to design around is the full operating weight: 300 gallons of water at 8.34 lb per gallon comes out to roughly 2,502 pounds resting on the tank's footprint. Your pad or stand has to carry that load plus a safety margin, dead level, and continuously supported across the full base - never on isolated blocks or a cracked slab, which is how poly tank bottoms get stress points. There are two 300-gallon Norwesco vertical configurations, a tall one and a shorter wide one, so confirm the diameter and height for this exact tank against the technical drawing on this page before you size a trailer deck, pad, or stand. If you are still deciding whether 300 gallons matches your draw rate and refill schedule, run it through our Tank Sizing Calculator or read the Tank Sizing Guide first.

Fittings and the mistake to avoid

This listing ships as a bare tank - there is no preset bulkhead or fitting package specified for it - so plan to confirm outlet size, outlet location, and gasket type against the technical drawing and order your bulkhead fitting, gasket, and any siphon or drain hardware separately. The single most common install failure on a vertical poly tank is threading a fitting directly into the tank wall and over-torquing it, which weeps or cracks the outlet; use a proper gasketed bulkhead fitting at the penetration instead. The other mistake is service it was not specified for: this is listed for liquid storage with no specific-gravity rating for heavier-than-water liquids and no chemical-resistance listing in its data. Treat it as a water and light-liquid tank. If you need to store something denser than water (specific gravity above 1.0) or any chemical, do not put it in this tank - call us at 866-418-1777 and we will spec a chemical-rated or higher-SG tank for the job.

Freight and how to order

This vertical storage tank ships LTL freight from the Norwesco plant in Petersburg, TX, and freight is quoted live to your ZIP code rather than rolled into the listed price. Get an exact number in seconds with our Freight Cost Estimator, or call 866-418-1777 and we will walk you through delivery, including liftgate and limited-access options. For a fuller breakdown of specs, dimensions, and use cases on this 300 gallon storage tank, see our 300 Gallon Vertical Liquid Storage Tank buyer's guide, and confirm the dimensioned footprint on the technical drawing before you finalize your stand.

3 Year Warranty

Adding to cart… The item has been added