The Enduraplas 2100-gallon beige vertical water storage tank (Enduraplas model TLV02100BE) gives you a tall, compact-footprint reservoir for bulk water on farms, jobsites, fire-water reserves, and water-reuse trains. It is a one-piece molded polyethylene vertical that stands 100 inches tall on an 85 x 85-inch footprint, holds 2,100 gallons, and carries a 1.1 specific-gravity rating. The vertical profile lets you stage real volume where ground space is tight, with fill and vent access at the top.
Will it work for your site?
Plan the pad and the plumbing around real loaded numbers, not the empty shell. Filled with water this water storage tank carries 17,514 pounds, and at its maximum rated contents it reaches 19,265 pounds. That load sits on the full 85 x 85-inch base, which works out to roughly 2.7 psi (about 384 pounds per square foot) of bearing pressure across the entire footprint, so the supporting pad has to be sized and leveled for the whole base, not just a center point. For matching tank volume to your draw and refill cycle, run the numbers through our Tank Sizing Calculator and the Tank Sizing Guide before you commit to a size. The 1.1 SG rating means the shell is built to hold liquids up to about 10% denser than water (the roughly 1,751-pound gap between water-full and max-rated weight), so it covers some light brines and solutions; route any non-water service to our team at 866-418-1777 to confirm chemical compatibility before you fill it.
Connecting and setting it up right
Outlet, bulkhead, and gasket specifications aren't published for this SKU, so call 866-418-1777 to confirm the available fitting size and the correct gasket material before you plumb it. That one call prevents the most expensive mistake on a tank this size after the foundation itself. Speaking of which, nearly nine tons of loaded weight on an 85-inch-square base needs a properly engineered pad, and our guide on concrete pad sizing for above-ground polyethylene tanks walks through the ACI 360R-10 framework so the base settles evenly instead of cracking the tank over time. After install, fill it methodically and watch for movement: our hydrostatic test methodology for new-install acceptance covers water-fill discipline, pad-settlement monitoring, and fitting-leak detection so you catch problems while they are still cheap to fix.
Fire reserve and reuse service
If this vertical storage tank is feeding a rural fire-water reservoir or an industrial reuse train, the fire-water reservoir design guide covers NFPA 22 sizing discipline and cold-climate freeze protection, while the water-reuse tank topology guide shows how a polyethylene water tank fits into grey-water, rainwater, and HVAC-condensate aggregation stacks. Dimensions are confirmed against the technical drawing on this page.
Freight and ordering
This tank ships LTL freight from the Enduraplas plant in Converse, TX, quoted live to your ZIP code. At 100 inches tall it travels as oversized freight, so get an exact number through our Freight Cost Estimator before you order, or call 866-418-1777 and we will quote it for you. The list price shown above excludes freight, which is quoted separately to your delivery address.
