The Enduraplas 7011 Gallon White Vertical Storage Tank is a bulk-volume vertical tank molded in natural white polyethylene, rated for contents up to a 1.9 specific gravity. That high SG rating is the number to notice first: it means the tank can hold water and heavier-than-water liquids without being the weak link, so if you later move from process water to a denser solution the vessel keeps its margin. In a 144 in by 144 in footprint standing 126 in tall, this white vertical storage tank suits fire-water reserves, irrigation, rainwater capture, industrial process water, and agricultural or municipal holding.
Will it work for your site?
Check the full envelope first: 144 in wide by 126 in tall. Confirm overhead clearance and gate or doorway access before you book freight on a unit this size. Then engineer the pad, because weight is the governing constraint. Full of water, contents weigh 58,472 lb; at the tank's maximum 1.9 SG rating, contents can reach 111,096 lb. That is a roughly 52,600 lb spread between plain water and max-density service on the same 144.0 x 144.0 in bearing surface. Size the base for the actual liquid you will store, not the nameplate maximum. Use the Tank Sizing Calculator and Tank Sizing Guide to confirm capacity against your draw and refill cycle, and design the foundation with our guide on concrete pad sizing for above-ground polyethylene tanks.
Common uses and the mistake to avoid
This is a proven vertical storage tank for rural fire-water reservoirs, where usable volume and freeze protection govern the design; our fire-water reservoir design guide covers NFPA 22 sizing discipline. It also serves captured-water reuse trains and rainwater programs; see our industrial water reuse tank topology and rainwater harvesting resources. The common mistake at this scale is treating the 1.9 SG rating as a license to skip pad engineering. The tank can carry the weight; the ground under it may not. Fitting and outlet configuration is confirmed at order, so call 866-418-1777 to lock in your outlet layout before the tank is built.
Freight
This tank ships LTL freight, quoted live to your ZIP, from the nearer of two Enduraplas plants: Converse, TX or Neche, ND. Which plant sources your tank drives both cost and lead time, so run the Freight Cost Estimator with your actual ZIP to see the real number, and confirm offload equipment is on site for a unit this large. For lead time, fittings, or freight routing, call 866-418-1777.
