Skip to main content

Enduraplas

Enduraplas 800 Gallon Yellow Horizontal Leg Tank

$3,199.00
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
THF00800Y
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
341.00 LBS
Width:
60.00 (in)
Height:
48.00 (in)
Depth:
94.00 (in)
Capacity:
800 Gallons
Material:
Polyethylene
Color:
Yellow
Length:
94"
Diameter:
82"
Outlet:
2" PP Female NPT Bulkhead Fitting
Specific Gravity:
1.9
Certifications:
FDA Approved
Warranty:
10 Year Warranty withActivation
Freight Class:
250
Manufacturer Part Number:
THF00800Y
Manufacturer:
Enduraplas

The Enduraplas 800 Gallon Yellow Horizontal Leg Tank (MPN THF00800Y) is a horizontal-cylinder polyethylene tank with molded plastic legs that allow direct ground or flatbed mounting without supplementary support structure.

Design

  • Saddles on a flatbed truck or trailer without rolling; secure with ratchet straps through molded tie-down points
  • Top-centerline manway for filling, inspection, and accessory mounting
  • End-fitting outlet provides gravity drain or pump-suction connection
  • One-piece rotomolded shell — no leg-to-tank welded joint to fatigue under transport vibration
  • UV-stabilized polyethylene rated for direct outdoor and transport-environment exposure

Installation

Set directly on a level concrete pad, treated-wood platform, or flatbed truck/trailer surface. The molded plastic legs handle the distributed load without supplementary supports. For mobile service, secure with ratchet straps through the molded tie-down points — do NOT cross-strap over the tank shell (point-loading through the tie-down corners is the rated load path).

Common applications

  • Disaster-response and emergency potable-water transport for utility and relief operations
  • Remote-site fuel hauling for fleet refueling at mining, logging, and construction operations
  • Livestock water hauling for range and pasture operations
  • Fire-protection auxiliary supply transport for wildland and rural fire response
  • Commercial pressure-washing and exterior-cleaning operator water tank
  • Trailer-mounted potable-water hauling for rural delivery service

Compatibility & compliance

Polyethylene shell construction meets ASTM D1998 for atmospheric service. For DOT-regulated transport of hazardous liquids, verify the specific tank carries the applicable DOT or 49 CFR-compliant certification — most rotomolded polyethylene leg tanks are NOT DOT-rated for hazmat transport and are limited to non-regulated water and aqueous-chemistry service.

Shipping

Ships LTL freight from the nearest manufacturing plant. ZIP-specific freight quotes are available through the freight estimator or by phoning 866-418-1777 with MPN THF00800Y.

Adding to cart… The item has been added