210 gallons in black at 1.9 specific gravity, chest height
The Snyder 1012900C34 is a black polyethylene vertical storage tank, 36 inches across and 55 inches tall, holding 210 gallons at 65 pounds. It is the black tank at the height where a person works: the 18 inch threaded, vented manway is at chest level, so a tote hose goes in and a float comes out without a step, and the black wall takes sun and keeps light off the liquid. Its wall is rated for a specific gravity of 1.9, or 3,328 pounds of contents against 1,751 for water. A 2 inch polypropylene female NPT bulkhead outlet, a 3 year warranty, and freight at class 300 from Philippi, West Virginia.
Buying on a purchase order? Request a written quote and we will return it with freight to your ZIP; card buyers add the 210 gallon tank to the cart above.
Black, and low enough to work on
The 210 takes what a part tote actually holds, and at 55 inches it goes under a mezzanine or a low roof on an outdoor pad where the 250 will not. Black polyethylene absorbs the ultraviolet that ages a white wall and passes no light to the liquid, so a light-sensitive chemical keeps its strength and stored water stays clear; the wall runs warmer in the sun than a white one, which argues for a shade roof if the liquid must stay cool, and it hides the level, so the sender does that work. Full at the rating it puts 3,328 pounds on a 36 inch circle: a level slab per the concrete pad sizing guide, a berm or a spill tray when the liquid is regulated, and a strap to the wall or a post behind it. The tank sizing calculator turns feed rate and delivery interval into a volume, and the tank sizing guide covers the reserve to keep the pump wet between deliveries.
The 36 inch black and white tanks, 200 to 250 gallons
| Part | Gallons | Diameter x height | Empty weight |
|---|---|---|---|
| 1012900C34 (this tank, black, 1.9 SG) | 210 | 36 x 55 in | 65 lb |
| 1012900C26 (white) | 210 | 36 x 55 in | 65 lb |
| 1012900N42 (XLPE) | 210 | 36 x 55 in | 65 lb |
| 1012900N48 | 210 | 36 x 55 in | 70 lb |
| 1008000C26 (white) | 200 | 36 x 53 in | 65 lb |
| 1008100C26 (white) | 250 | 36 x 64 in | 70 lb |
The C26 is this tank in white for indoors, where the level shows through the wall; the N42 is the cross-linked one for hypochlorite and peroxide, and the N48 the other chemical grade, five pounds heavier on the sheet. The 1008000C26 is the 200 at 53 inches and the 1008100C26 the 250 at 64, the same base and fittings either side.
Ready to choose a row? Add the 210 gallon tank to your cart above with freight quoted to your ZIP, or 866-418-1777 will confirm it against the site first.
Fittings at working height
- Outlet: 2 inch polypropylene female NPT bulkhead fitting, at the base; a flexible connector to hard pipe, the valve supported off the pad, and the reducer to the pump's suction at the pump.
- Access: 18 inch threaded, vented manway, 55 inches up, opened from the ground; fill from a tote through a dip tube, and vent outside on anything that fumes.
- Service limit: 120 F / 48 C.
A black wall hides the level, so a sender read at ground level or a sight tube off the outlet goes in with the tank, and a low-level float shuts the pump off before it draws air. Mount the pump below the outlet so it primes by gravity, keep the manway closed against vapor loss and rain, and label the one chemical the tank holds. Where it freezes, wrap or trace the outlet valve and the first pipe run; the body takes ice from the top down without harm, and a black wall thaws first in the morning sun.
Where the black 210 goes
A well site's feed tank under a low roof, a chemical tank at a lift station, the coagulant supply at a package plant in the open, the treatment tank on an outdoor cooling tower skid, and water for a job site trailer. If the liquid is one that warrants a second wall, the Captor double wall freeboard guide explains what a contained tank gives up in usable volume at this size. Not a fire tank; the fire-water reservoir design guide sizes those in thousands of gallons and a water wall, and where a reuse system doses treatment chemical between storage stages, the industrial water reuse tank topology article shows where a tank this size sits.
Freight from Philippi
The 1012900C34 ships from Philippi, West Virginia as LTL freight at class 300; the freight cost estimator quotes it to your ZIP, and the listed price is before freight. One person carries 65 pounds; it goes through a door on its side. Fill it with water to the manway once and look at the outlet fitting for a weep, then drain and dry before the chemical goes in. Keep a spare gasket for the outlet fitting with the pump spares; it is the part that fails on a holiday. Leave room to walk all the way around it; the side of the tank nobody can see is the side that leaks.
Freight and documents
Ships from: Philippi, WV. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 1012900C34.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.