300 gallons of black water storage under four feet
The Snyder WB23 is a black polyethylene water tank that holds 300 gallons in a shell 46 inches across and only 48 inches tall, weighing 63 pounds. It is the small water tank for full sun under a deck or a low eave: the black wall keeps light out so the water stays clear of algae, and the low, wide shape cannot tip and puts the 18 inch threaded, vented manway at waist height. A 1-1/2 inch polypropylene female NPT bulkhead inlet, a 2 inch polypropylene female NPT bulkhead outlet, a 3 year warranty, and a rating of 1.0 specific gravity for water and liquids no heavier.
Ready to price it? The listed price is before freight; quote freight to your ZIP in a few seconds, then add to cart above or call 866-418-1777.
A tank that hides under the deck
At 48 inches the WB23 disappears under a raised deck or beside a downspout without a screen around it, and 2,502 pounds on a 46 inch circle sits low enough that no strap is needed; a compacted gravel pad or a slab in full contact carries it. Black polyethylene absorbs the ultraviolet that ages a white wall and passes no light to the liquid, so a black tank outdoors holds water clear for years. Two of our buyers guides cover this volume in other makers' black water tanks, the first 300 gallon black water tank buyers guide and the second 300 gallon black water tank buyers guide. The tank sizing calculator tells you whether 300 gallons covers the draw, and the tank sizing guide covers days of supply.
Snyder's 200 to 330 gallon water tanks
| Part | Gallons | Diameter x height | Empty weight |
|---|---|---|---|
| WB23 (this tank, black, low profile) | 300 | 46 x 48 in | 63 lb |
| WB22 (black, tall) | 300 | 36 x 82 in | 65 lb |
| WB24R (black, low profile) | 330 | 47 x 50 in | 70 lb |
| WG24R (green, low profile) | 330 | 47 x 50 in | 65 lb |
| 32499 (tall) | 300 | 36 x 72 in | 57 lb |
| 32501 (tall) | 300 | 36 x 72 in | 57 lb |
| 32613 (tall) | 300 | 36 x 72 in | 57 lb |
| 32495 (low profile) | 200 | 40 x 42 in | 33 lb |
The WB22 is the same 300 gallons in black stood up on a 36 inch base at 82 inches for a corner with height and no floor, and the WB24R and WG24R the 330 gallon low tanks an inch wider, in black and green. The 32499, 32501 and 32613 are the tall 300s in other colors and fittings, and the 32495 the 200 gallon step down under 42 inches.
Want us to check the fit? Send the site dimensions to 866-418-1777 or through a written quote request and we will confirm the tank, the pad and the freight.
Ports and manway
- Inlet: 1-1/2 inch polypropylene female NPT bulkhead fitting.
- Outlet: 2 inch polypropylene female NPT bulkhead fitting, at the base; a flexible connector between the fitting and hard pipe, and the valve supported off the pad.
- Access: 18 inch threaded, vented manway at waist height.
- Service limit: 120 F / 48 C.
A 2 inch outlet on a low tank gives a pump a flooded suction to the last few inches; a garden hose runs by gravity but slowly, because there is little head. A black wall shows no level, so a float gauge on the manway or a sight tube off the outlet does that work. In a freezing climate insulate or drain the outlet valve and the first run of pipe; the body takes ice from the top down without harm.
Duty it is sized for
A rain cistern under a deck, a haul-in water supply for a cabin, stock water in a paddock, a buffer for a well pump, and one cell of a small fire reserve of the kind the fire-water reservoir design guide describes. Several of them are the storage stage of a small reuse system for roof water and condensate, per the industrial water reuse tank topology article, where the dark wall keeps the stored water clear.
Landing it on the pad
The WB23 ships as LTL freight at class 300; the freight cost estimator gives the number for your ZIP; the price shown here is before freight. One person carries 63 pounds, and at 46 inches across it goes through a double door or a gate. Fill it to the manway once, check both fittings, and set it where the outlet faces the pump, because a low tank is not easily turned once it is full. A photo of the tank on its pad, full, on day one is worth keeping; it is the baseline every later inspection is compared against.
Freight and documents
Ships from: Marked Tree, AR. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries WB23.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.