The Enduraplas 200 Gallon Green Vertical Storage Tank (SKU THV00200G) is a 200-gallon polyethylene vertical storage tank standing 79 inches tall on a compact 30 x 30 inch footprint. Built by Enduraplas in green polyethylene, it holds 200 gallons of water in a self-supporting upright cylinder. If you are sizing a vertical tank for water storage, this is a mid-capacity unit that balances height against a small ground footprint.
Will it work for your storage
This tank carries a 1.9 specific gravity rating, which means the wall is engineered to hold contents up to 1.9 times the weight of water. Full of water it weighs about 1,668 pounds; at its maximum rated contents weight it carries up to 3,169 pounds. The same shell goes from roughly 1,668 pounds on water to 3,169 pounds at full rating, so the 1.9 rating means this water tank also covers heavier fluids up to 1.9 SG, including many liquid-fertilizer and chemical services, without stepping up to a thicker-wall tank. Anyone planning heavier-than-water service must size the pad and anchors to the 3,169-pound figure, not the 1,668-pound one. The 30 x 30 inch footprint and 79-inch height make it a good fit for pump houses, equipment sheds, and indoor utility rooms where floor space is tight. To match gallons to your demand, run the numbers through our Tank Sizing Calculator or read the Tank Sizing Guide before you commit to a capacity.
Specs, placement, and fittings
At 79 inches tall on a 30-inch base, this is a tall-narrow vertical with roughly a 2.6-to-1 height-to-width profile, so anchor or strap it in exposed or seismic locations. The green, opaque polyethylene limits light transmission into the tank, which helps suppress algae growth in stored water compared with a translucent wall. Review the listed dimensions before you plumb the inlet and discharge so you can stage your connections and route line to the tank, and confirm fitting and lid configuration per order. Call 866-418-1777 to verify inlet, outlet, and gasket sizing before you plumb. For above-ground installs the loaded weight drives your foundation: our guide on concrete pad sizing for above-ground polyethylene tanks walks through the ACI framework for a slab that carries 3,169 pounds without cracking or settling.
Common uses
As a 200 gallon vertical storage tank, this unit serves rainwater capture, fire-water reserve at rural and remote sites, and industrial water reuse where banded storage trains hold grey-water, rainwater, and HVAC condensate. If you are building a private fire-protection reserve, our walkthrough on fire-water reservoir tank design covers NFPA 22 sizing and cold-climate freeze protection. For reuse projects, see our breakdown of industrial water reuse tank topology, and for harvesting setups our first-flush diverter sizing guide.
Freight and ordering
This tank ships LTL freight from Converse, Texas, quoted live to your ZIP code. Get an exact number through our Freight Cost Estimator before you order, or call 866-418-1777 and we will quote the lane and confirm lead time. The listed price is the tank only before freight, which is quoted separately by destination.
