The Snyder Industries 100 Gallon HDPE Vertical Liquid Storage Tank in White is a 100-gallon polyethylene vertical storage tank built for clean liquid and water-holding duty. It stands 41 inches tall on a 30-inch by 30-inch round footprint, so it slots into a tight corner, a utility room, or a trailer bed without sprawling. The white polyethylene body gives you a durable, single-material wall for indoor or sheltered outdoor service, with moderate light penetration and some interior visibility for checking fill level.
Will this vertical storage tank work for your job?
This 100 gallon tank is rated for liquids up to a 1.9 specific gravity, which is a notably high ceiling for a water-class HDPE tank this size. Many water-duty tanks are walled for 1.0 to 1.5 SG, so the wall here is sized well above plain water density. The practical upside is headroom: you are not paying a structural penalty if you later move to a denser clean liquid, and water service is well inside its comfort zone. Filled with water the tank carries roughly 834 pounds; at its maximum rated 1.9 specific gravity it is built to hold up to 1,585 pounds of contents. Plan the stand or pad to that worst case, not to plain water: 1,585 pounds across the 30-by-30 footprint (about 2.5 square feet) works out to roughly 635 pounds per square foot, a number your contractor can design a pad or platform to. Fitting and outlet layout is not published in this listing, so confirm the outlet, bulkhead, and lid configuration you need by calling 866-418-1777 before you finalize plumbing. If you are not certain a 100-gallon tank matches your draw-down and refill cycle, run the numbers through our Tank Sizing Calculator and the Tank Sizing Guide.
How this tank ships
This vertical tank ships LTL freight from the Snyder Industries plant in Philippi, WV, and freight is quoted live to your ZIP code rather than bundled into the list price. Because every quote is calculated from Philippi, WV, buyers in the Mid-Atlantic and Northeast will generally see lower LTL than West Coast ZIPs, and a delivery point with good motor-freight access keeps the number down further. Get an exact figure in seconds with our Freight Cost Estimator, or call 866-418-1777 and we will quote it for you.
The mistake to avoid
The trap on a tank like this is over-reading the 1.9 specific gravity rating. That number tells you the wall can structurally handle dense liquids up to 1.9 SG, but it is not a chemical-resistance clearance. White HDPE handles water and many clean liquids well, yet a high SG rating alone does not certify a given chemical against this resin. If you are storing anything beyond water, verify your specific liquid against the resin before you fill, and size the stand for the true filled weight at your contents' density, not for plain water. For deeper background on how vertical HDPE walls are engineered and where they age first, see our guide on HDPE tank wall thickness at the vapor-saturated headspace.
Ready to move on this 100 gallon vertical storage tank? Pull a live freight quote to your ZIP with the Freight Cost Estimator, confirm your fitting layout by phone, or call 866-418-1777 to lock in your order.
