Snyder Industries 90 Gallon ASTM XLPE Heavy Duty Vertical Storage Tank

Ninety gallons where a tall tank will not fit

Most tanks grow taller as they get bigger. This one grows wider. At 41 inches tall it goes under a mezzanine, a low basement ceiling, a pipe rack, a stair or a bench, and the top stays low enough to fill and inspect without a ladder. The 34 inch footprint is roughly a drum and a half across. Typical indoor jobs: the bulk side of a chemical feed in a water treatment room, a cleaning solution supply in a food or dairy plant, a holding tank for process rinse, or a reserve tank in a utility room. The natural white wall is the reason to pick it indoors: anyone walking past can see the level, and a change in colour or settled solids shows through. The cross-linked wall is made for the harder chemistries; if you are not sure you need it, call us with the liquid and we will tell you. Check the liquid in our chemical compatibility guide before you order.

Translucent means light gets in. If the tank will sit in direct sun, or the liquid is sensitive to light, look at the black versions below.

What to check before you buy

1. The doorway. The tank is 34 inches across. Measure the narrowest door, hallway or stair on the way in before you order, not after it arrives.
2. The floor. Up to about 1,426 lb on a 34 inch circle needs a flat, level, solid floor with nothing under the tank. Our concrete pad sizing guide covers slabs.
3. Fittings. The outlet and lid on 5690100N42 are not listed on this page. Tell us the outlet size and height you need, and we will confirm what comes on the tank.
4. Listings. If an inspector or a spec calls for a listing, ask us for the written statement for this part number before you buy.
5. The drawing. The technical drawing for 5690100N42 is linked under Technical Drawing on this page.

Sizes and versions nearby

The 5690100 base number in black, for a liquid that must stay in the dark: the ASTM XLPE 5690100N48 and the ASTM heavy duty 5690100N51. A step down is the 70 gallon heavy duty tank; a step up is the black 100 gallon ASTM XLPE tank. Compare diameter and height on each page, because the shapes differ. Check your volume with the tank sizing calculator or the tank sizing guide. If the water is for fire protection, our fire water reservoir design guide explains the much larger volumes that takes.

Shipping and receiving

The tank ships LTL at freight class 300 from Marked Tree, Arkansas, as a 34 by 34 by 41 inch load weighing 43 lb. Two people carry it in easily. Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight. If your site has no dock, tell us when you order so the carrier brings a liftgate. At the tailgate, check 5690100N42 on the bill of lading against the tank label, look the base and the top for cracks, and note any damage before you sign. Fill it with water first and check every connection before the chemical goes in.