Skip to main content

Norwesco

5000 Gallon Plastic Water Storage Tank - Black (119" x 112")

$5,270.00
0
(No reviews yet) Write a Review
Selected Color is
Adding to cart… The item has been added
SKU:
N-42044
Availability:
In Stock - Ships from nearest Norwesco manufacturing plant
Weight:
775.00 LBS
Width:
119.00 (in)
Height:
112.00 (in)
Depth:
119.00 (in)
Diameter:
119"
Color:
Black
Specific Gravity:
1.1
Outlet:
2
Lid/Manway:
22
Material:
Polyethylene (HDPE)
Capacity:
5000 Gallons
Max Temperature:
120 F / 48 C
Certifications:
FDA Approved, UV Stabilized
Warranty:
3 Year
Freight Class:
OVS
Technical Drawing:
https://onesourceplastics.com/content/norwesco-technical-drawings/norwesco-5000-gallon-vertical-water-storage-tank-in-black-42044.pdf
Ship Weight:
775 lb
Ship Dimensions:
119" L x 119" W x 112" H (crated)

The 5000 Gallon Plastic Water Storage Tank - Black (119" x 112") (MPN N-42044) is a vertical above-ground water tank designed for whole-house cistern, livestock watering, irrigation buffer, and fire-protection auxiliary supply applications.

Design

  • One-piece rotomolded construction — no welded seams, no bolted joints (failure paths in steel or fiberglass alternatives)
  • NSF/ANSI 61–listed resin certified for drinking-water-system component service
  • UV-stabilized polyethylene compound rated for direct outdoor sun exposure without coating
  • Self-supporting flat-bottom design — no internal bracing, no external support cage required
  • FDA-listed resin under 21 CFR 177.1520 for direct potable-water contact

Installation

Set on a level concrete pad, compacted base ring, or 2x6 wood platform sized at least 6 inches wider than the tank diameter. A filled water column at 5000 gallons exerts approximately 41,700 lb of point load — confirm the supporting structure meets this load case before commissioning. For wind-exposed installations or seismic IBC Risk Category III/IV jurisdictions, anchor the tank with steel strapping to a structural foundation per ASCE 7 Chapter 13 non-structural component anchorage requirements.

Common applications

  • Rural homestead and off-grid cabin whole-house potable water buffer
  • Low-yield well storage cistern for residences experiencing seasonal drawdown
  • Livestock watering supply for cattle, equine, swine, sheep, and goat operations
  • Fire-protection auxiliary supply per NFPA 1142 for rural residential and small-commercial sites
  • Construction-site water staging for concrete mixing, dust suppression, and equipment wash-down
  • Rainwater harvesting downstream of gutter collection systems

Compatibility & compliance

Rotomolded HDPE wall meets ASTM D1998 (Polyethylene Upright Storage Tanks for Storage of Aggressive Chemicals) for non-pressurized atmospheric service. NSF/ANSI 61 listing applies to drinking-water-system components when the OEM model carries the certification mark. Not rated for petroleum products, organic solvents, or liquids of specific gravity above 1.0 unless the tank is explicitly labeled for heavy-duty service.

Shipping

Ships LTL freight from the nearest manufacturing plant. ZIP-specific freight quotes are available through the freight estimator or by phoning 866-418-1777 with MPN N-42044.

3 Year Warranty

Adding to cart… The item has been added