Skip to main content

Norwesco

Norwesco 100 Gallon Plastic Portable Loaf Utility Tank in Black

MSRP: $408.00
$403.94
(You save $4.06 )
0
(No reviews yet) Write a Review
Adding to cart… The item has been added
SKU:
N-45345
Availability:
In Stock - Ships from nearest manufacturing plant
Weight:
46.00 LBS
Width:
20.00 (in)
Height:
32.00 (in)
Depth:
48.00 (in)
Capacity:
100 Gallons
Material:
Polyethylene
Color:
Black
Length:
48"
Inlet:
NO FTG
Outlet:
NO FTG
Lid/Manway:
8"
Specific Gravity:
1.5
Max Temperature:
120 F / 48 C
Certifications:
FDA-compliant resin
Freight Class:
LTL
NMFC Code:
156600-03
Manufacturer Part Number:
45345
Manufacturer:
Norwesco
Technical Drawing:
https://onesourceplastics.com/content/norwesco-technical-drawings/norwesco-100-gallon-plastic-portable-loaf-utility-tank-in-black-45345.pdf
Ship Weight:
91 lb
Ship Dimensions:
48" L x 20" W x 32" H
Specific Gravity Rating:
1.5 (Max 12.52 lbs/gal)
Lid Size:
8"

A 100 gallon black loaf tank that fits through a door and across a truck bed

The Norwesco 100 gallon portable loaf utility tank, part number 45345, is a black polyethylene tank 48 inches long, 20 inches wide and 32 inches tall, weighing 46 lb empty. A loaf tank is a flat bottomed, upright rectangle: 20 inches wide is narrow enough to go through a standard doorway and to sit against the front wall of a pickup bed or along the side of a trailer without taking the whole deck. It comes with no fittings, so you drill and fit the outlet where your job needs it, and it has an 8 inch lid on top. The tank is rated for liquids up to 1.5 specific gravity, which covers water, most liquid fertilizers and many common chemicals; 100 gallons of water weighs 834 lb. The resin is FDA compliant per Norwesco and the service limit is 120 F. Black keeps light out of the contents, which slows algae in water and protects light sensitive liquids.

Is this the right size? Get freight to your ZIP and add it to your cart above, or call 866-418-1777 with where it is going.

Where it goes

This is the tank for a water supply in a pickup bed under a tonneau, a fresh or grey water tank in a trailer or a work van, a basement or utility room tank that has to get through the door, or secondary containment under a drum. At 48 by 20 inches it sits across the front of a full size pickup bed, and at 32 inches tall it clears most bed rails. Full of water the contents alone weigh close to 830 lb, so a vehicle's payload rating and the floor it stands on indoors both need to carry that. Strap it across the body where it rides on a vehicle, never over the lid, and give it a flat, continuous surface under the whole base. Our doorway tank sizing guide covers picking a size for a tank that has to pass through a door, and the loaf tank DOT classification guide covers how a loaf tank is treated on the road under the agricultural exemption.

What goes in it

Water is the usual load, with liquid fertilizer, soap and rinse solutions and the common treatment chemicals that polyethylene handles behind it. Before anything new goes in, check the liquid in our chemical compatibility guide. Liquids heavier than 1.5 times water need a heavy duty tank, not this one. For the volume itself, use the tank sizing calculator and tank sizing guide.

Openings and fittings

  1. Lid. An 8 inch lid on top is the only opening as shipped: big enough to fill from a hose or a pump and to get a hand inside to clean. Norwesco's drawing, linked on this page, shows the lid type and position; call us if you need to know before you order whether it vents.
  2. Outlet. None is fitted. If you want one, a bulkhead fitting goes through a flat area of wall at least as wide as its flange so the gasket seals all the way round, low on the long side for a drain or on the end wall for a pump. Tell us the connection you are making and we will put the right fitting on the same order.
  3. Inlet. None is fitted. Fill through the lid.
  4. Drawing. Norwesco's drawing for this tank, linked under Technical Drawing on this page, shows the flat areas of wall for a fitting and the base layout for strapping.

Sizes nearby

A second listing with the same size, weight and fittings: the 100 gallon black loaf utility tank 45861. For a tank that sloshes less on the road, the 100 gallon flat bottom tank with slosh guard is the same volume in white. A near size up: the 110 gallon black flat bottom utility tank. One size down: the 55 gallon flat bottom utility tank without fittings.

Shipping and receiving

The tank ships LTL from the nearest of Norwesco's plants in Albertville, Alabama; Hanford, California; Sheldon, Iowa; or Washington Court House, Ohio, 48 by 20 by 32 inches on a pallet and 91 lb packed, which two people can walk off a liftgate. The listed price is before freight; the freight cost estimator gives the lane cost to your ZIP. At the tailgate, check the part number against 45345 on the bill of lading, look at the corners and the base for transit damage, and fill it with water the first time before it carries anything else.

Questions before you order? Call 866-418-1777.

​‌​​‌​‌‌‌‌‌‌‌‌‌‌​​‌‌‌​‌​​‌‌​​‌​‌​​​‌​‌‌‌

Freight and documents

Ships from: Albertville, AL; Hanford, CA; Sheldon, IA; Washington Court House, OH. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.

Technical drawing (PDF) for Norwesco 45345.

See this tank

Product video. Watch the Norwesco 100 Gallon Plastic Portable Loaf Utility Tank in Black video (61 seconds) with dimensions, fittings and shipping notes.

Ready to order?

Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.

Adding to cart… The item has been added