The Norwesco 14 Gallon Plastic Spot Sprayer Tank is a compact white polyethylene tank built for portable spot-spraying rigs, ATV and UTV sprayer skids, and small-batch liquid handling where you need a tank that fits a tight footprint. Listed at 14 gallons, this white Norwesco sprayer tank measures 15 in high, 14 in wide, and 31 in long, so it drops cleanly onto a narrow rack or sprayer frame without hanging over the edges.
Fit check before you mount it
For a UTV or ATV skid, clearance is the first buying question, so verify these dimensions against your rack:
- Length: 31 in
- Width: 14 in
- Height: 15 in (low profile)
- Footprint: 14.0 x 31.0 in
The low 15 in profile keeps the center of gravity down on a moving platform, which matters when you are running spray equipment over uneven ground. Confirm outlet and fill-port placement against the technical drawing on this page before you plumb your pump and spray boom, and use the Tank Sizing Calculator and Tank Sizing Guide if you are still settling on the right capacity for your application.
Will it carry your spray load?
The molded shell carries a 1.5 specific gravity rating, meaning it is engineered to hold contents up to 1.5 times the weight of water. Here is how that translates: filled completely with plain water, the tank weighs about 117 lb, and its maximum rated contents weight is 175 lb. At a full 14 gallons, a 1.5-SG fill works out to that same 175 lb ceiling, so the SG rating and the weight cap are the same limit at full volume. Any standard agricultural spray solution runs well under 1.5 SG, so you can fill this tank completely and stay safely inside its rating. Plan your mounting hardware and skid frame around the 175 lb loaded figure, not the empty weight.
The mistake to avoid
The most common error on a spot sprayer tank is loading it past its rated weight. The 1.5 SG rating and 175 lb maximum contents weight are firm limits for this Norwesco tank. If your spray mix runs denser than water, do the math on total fill weight before you top it off, and never assume "14 gallons" alone tells you whether the load is safe for the wall thickness. This is a sprayer tank, so match the contents to a water-and-agricultural-spray duty and confirm chemical compatibility for your specific solution before filling.
Freight and ordering
This Norwesco tank ships LTL by freight, quoted live to your ZIP code from the nearest Norwesco plant. Norwesco molds from a wide network including Burnet, TX, Fairfield, TX, Griffin, GA, Hanford, CA, Lancaster, OH, Owego, NY, Shawnee, OK, Sheldon, IA, St. Bonifacius, MN, Tooele, UT, and Washougal, WA, so freight is routed from whichever facility is closest to you to keep transit short. Run your ZIP through the Freight Cost Estimator for a live LTL rate, or call 866-418-1777 and we will line up your spot sprayer tank, confirm the fitting layout from the drawing, and get it on a truck.
