1,000 gallons, 69 inches tall, with ASTM certification
The Snyder 5990100N45 is a low profile liquid storage tank: 1,000 gallons of white high density linear polyethylene in a shell 74 inches across and 69 inches tall, weighing 525 pounds. That is a heavy wall for 1,000 gallons, twice the resin of the tall 60 inch tanks of the same volume, with a rating of 1.9 specific gravity, or 15,846 pounds of contents against 8,340 for water, and it is sold with ASTM certification for the submittal. An 18 inch threaded, vented manway at chest height, and a 3 year warranty.
Is this the right 1000 gallon tank? Call 866-418-1777 with the liquid, the site and the ceiling height, or get freight to your ZIP and add it to your cart above.
Low, heavy and certified
A tank wider than it is tall cannot tip, keeps its manway within reach, and keeps a pump suction flooded to the last few inches; the cost is 74 inches of floor in full contact with a level pad carrying up to 15,846 pounds at the rating. The certification is against ASTM D1998, the standard rotationally molded polyethylene tanks are specified to, and the way a tank meets it is in the wall; the HDPE tank wall thickness guide explains the D1998 sizing logic and why the vapor headspace is where tanks fail first. The three 1,000 gallon vertical tank buyers guides (64 x 81, 72 x 66) compare the shapes in this class across makers; the tank sizing calculator and the tank sizing guide settle the volume.
Low against tall at 1,000 gallons
| Part | Gallons | Diameter x height | Empty weight |
|---|---|---|---|
| 5990100N45 (this tank, ASTM certified) | 1,000 | 74 x 69 in | 525 lb |
| 1831000C34 (tall) | 1,000 | 60 x 89 in | 260 lb |
| 1831000N42 (tall, XLPE) | 1,000 | 60 x 89 in | 300 lb |
| 1810000C34 (doorway) | 850 | 48 x 117 in | 210 lb |
| 1710000C26 (low profile) | 1,100 | 86 x 55 in | 160 lb |
The 60 inch tanks are the same 1,000 gallons stood up, 20 inches taller on a base 14 inches narrower, at half the wall; the N42 is cross-linked for oxidizers. The 1810000C34 is the doorway shape at 48 inches across, and the 1710000C26 is the lightest low tank, 1,100 gallons at 55 inches on an 86 inch base. The 5990100N45 is the one for the dense liquid, the low room and the paperwork.
Comparing across brands too? Call 866-418-1777; we carry Norwesco, Snyder, Chem-Tainer, Enduraplas and Bushman and will say which one fits, or price the freight first.
Connections
- Access: 18 inch threaded, vented manway, at chest height; a fill hose, a float switch and a sender fit at once.
- Outlet: specify the bulkhead fitting for the chemical when ordering; a flexible transition to the pipe and a valve supported off the floor.
- Service limit: 120 F / 48 C.
A 69 inch range is easy for any level sender, and a white tank in daylight shows its own. Fill through a dip tube so a fast unload does not splash the lid, keep the vent clear so a pump cannot pull the wall inward, and inspect above the liquid line, in the headspace, where a wall fails first.
What it holds in practice
Treatment chemicals in a room with a low ceiling, brine and fertilizer on a trailer where a tall tank would be top-heavy, and bulk liquid at a plant that needs the certification on file. In a freezing climate a solution expands against a wall not designed for ice; house the tank or keep it above freezing.
Getting it to the pad
At 74 inches across the 5990100N45 ships as LTL freight (NMFC 156600-03), palletized, at a class rate the freight cost estimator shows for your ZIP; the listed price is before freight. A liftgate and a pallet jack handle 525 pounds. Water-fill to the manway and hold it before the first product fill, and keep the certification paperwork with the project file. Once it is full and holding, leave it alone for a day before the plumbing goes on; a settled tank is a quiet one.
Freight and documents
Ships from: Chowchilla, CA; Lincoln, NE. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 5990100N45.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Product video. Watch the Snyder Industries 1000 Gallon HDPE Vertical Liquid Storage Tank with ASTM Certification in White video (69 seconds) with dimensions, fittings and shipping notes.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, request a written quote, or call 866-418-1777. The listed price is before freight.
