The Snyder Industries 1000 Gallon Vertical Liquid Storage Tank is a white, high-density linear polyethylene (HDLPE) vertical tank rated to 1.5 specific gravity, built for bulk water and liquid storage where you need real headroom on a compact pad. It stands 89" tall on a 60" x 60" base, so it fits a tighter footprint than wider 1000-gallon tanks while still giving you the full thousand gallons of usable volume. This is the same Snyder vertical storage tank buyers search for as a "1000 gallon vertical tank," and the dimensions and fittings shown on the technical drawing on this page are exactly what ships.
Will it work for your site?
Filled with water, this tank carries roughly 8,340 lb of contents; at its full 1.5 specific gravity rating it is engineered to hold up to about 12,510 lb of liquid. That SG headroom is the real differentiator here: one tank covers both plain water and heavier-than-water service up to 1.5 SG without de-rating, so you are not buying a water-only vessel. Before you set it, confirm your pad or slab is level and rated for the loaded weight on the 60.0 x 60.0 footprint at full load, roughly 12,510 lb. Plumbing comes ready to connect: the drawing specifies a 2" polypropylene threaded bulkhead fitting with EPDM gasket near the base for your draw line, a flat 8" x 7.5" fitting pad, stainless lid hardware, and a 20" vented manway up top for fill, inspection, and venting as the tank breathes during fill and draw. Use our Tank Sizing Calculator and Tank Sizing Guide to confirm 1000 gallons matches your draw-down and refill cycle.
The mistake to avoid
Two things trip people up on a tall vertical like this. First, the height: at 89" you need clearance above the tank, not just 89" of total space, so the manway lid can open and you can reach the top for fill. Check roof, eave, and doorway clearance before delivery day, not after the truck arrives. Second, the fittings are factory-located on flat pads at set heights, so plan your outlet plumbing and manway access around the drawing dimensions rather than assuming you can drill wherever convenient. If you add or replace a fitting, order a 2" PP threaded bulkhead with an EPDM gasket to match what is already specified, and confirm that gasket and tank material suit your specific liquid before service, since EPDM is not compatible with every chemical.
Freight and ordering
This tank ships LTL freight from Snyder, with Albertville, AL as the named stocking plant and other regional locations available; the closest plant to your ZIP is selected at quote time, so a central or western shipment may route from a nearer facility. Freight is quoted live to your ZIP rather than baked into the list price. Get a real number in seconds with our Freight Cost Estimator, or call 866-418-1777 and we'll quote it for you and confirm the right configuration for your application. For a deeper walkthrough of sizing and placement on a 1000 gallon vertical, see our 1000 Gallon Vertical Storage Tank buyer's guide before you order.
