A tall, slim 150 gallon heavy duty tank for a narrow corner
The Snyder Industries 150 gallon ASTM XLPE heavy duty vertical tank, part number 5710100N42, is a natural white cross-linked polyethylene tank 34 inches in diameter and 61 inches tall, weighing 58 lb empty. It belongs to Snyder's ASTM heavy duty range, and the wall is rated for liquids up to 1.9 specific gravity: 150 gallons of water weighs 1,251 lb, and the same volume of a 1.9 liquid weighs 2,377 lb. The service limit is 140 F. Snyder covers it with a 3 year warranty. It is moulded at Snyder's plant in Marked Tree, Arkansas.
Short on floor space? Call 866-418-1777 with the corner you have and the liquid going in, or get freight to your ZIP and add it to your cart above.
A small footprint that goes up instead of out
At 34 inches across this tank needs very little floor, and it makes up the volume in height: 61 inches is about five feet. That suits a utility room corner, the end of a greenhouse bench, a pump skid or a spot beside a building where a wide tank would block a walkway. Being tall and narrow, it is also easier to tip, so strap it to a wall or a frame and set it on a level base before the first fill. The top is above most people's shoulders, so plan how you will fill it and look inside it, whether a hose to the top, a pump, or a step.
The heavy duty cross-linked wall and 1.9 rating make it a tank for denser liquids and harder service as well as water. Our article on when cross-linking matters for chemistry duty covers why that resin is chosen. Check any liquid other than water in our chemical compatibility guide before it goes in, and keep it at or below 140 F.
The natural white wall lets you see the level from the outside. It also lets light through, so water kept in sun will grow algae; indoors or in shade is better for drinking water. Ask us for the paperwork if you need it on file.
What to check before you buy
- Height. Measure the ceiling, the door frame and the path in. A five foot tank on a hand truck gets taller when it is tipped back.
- Base. A flat, level surface in full contact with the base. Our concrete pad sizing guide covers when a slab is worth pouring.
- Openings. No outlet or manway size is stated here. Give us the pipe size and connection you need and we will confirm against Snyder's drawing before it ships.
- Headroom inside. Leave space at the top for a liquid that warms and expands; our note on freeboard and the volume you can really use has the method.
- Drawing. Snyder's drawing for 5710100N42 is linked under Technical Drawing on this page.
Check the volume against your use with the tank sizing calculator and the tank sizing guide.
Other 150 gallon tanks and nearby sizes
Another 150 gallon heavy duty tank in cross-linked resin: the 150 gallon ASTM XLPE heavy duty tank 1012800N42. Also at 150 gallons: the heavy duty tank 1012800C26 and the black heavy duty tank 1012800C34. One size down, the 130 gallon heavy duty tank 1007300C26; one size up, the 175 gallon heavy duty tank 1008400C26.
Shipping and receiving
The tank ships LTL at freight class 300 from Marked Tree, Arkansas, 34 by 34 by 61 inches and 58 lb. The listed price is before freight; the freight cost estimator shows the cost to your ZIP. At the tailgate, check the part number against 5710100N42 on the bill of lading, look for transit damage on the wall and base, and note any on the paperwork before signing. Fill it with water first and watch the connections before it carries anything else.
Ready to order? Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.
Freight and documents
Ships from: Marked Tree, AR. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 5710100N42.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.
