330 gallons in black at 1.9 specific gravity, the one you see over
The Snyder 1011600C34 is a black polyethylene vertical storage tank, 44 inches across and 58 inches tall, holding 330 gallons at 80 pounds. At 58 inches it is the 330 a person sees over, with the 18 inch threaded, vented manway at chest height and no step, and the black wall is for the tank that stands under a lean-to or against a sunny wall: it absorbs the ultraviolet that ages a white tank and keeps light off the liquid. Its wall is rated for a specific gravity of 1.9, or 5,229 pounds of contents against 2,752 for water, so it holds the dense chemicals a tote does. A 2 inch polypropylene female NPT bulkhead outlet, a 3 year warranty, and freight at class 300 from Philippi, West Virginia.
Know your ZIP and your ceiling height? Freight to your ZIP takes seconds, and 866-418-1777 will confirm the height; then add it to your cart above.
Chest height, in the sun
A tank that stands outdoors beside a door is opened by whoever walks past it, and 58 inches means that person opens the lid, drops a lance or reads a float standing on the ground; the 44 inch base is a foot narrower than the low 330 for the same volume. Black runs warmer in the sun than white, so a chemical that must stay cool wants the shade side, and it hides the level, so a sight tube off the outlet goes on with the tank. Full at the rating it puts 5,229 pounds on a 44 inch circle: a level slab per the concrete pad sizing guide, or a containment pallet rated for the weight, with a berm or a spill tray when the liquid is regulated, and a strap to the wall behind it. The tank sizing calculator turns feed rate and delivery interval into a volume, and the tank sizing guide covers the reserve to keep the pump wet between deliveries.
The 330s in three shapes, black and white
| Part | Gallons | Diameter x height | Empty weight |
|---|---|---|---|
| 1011600C34 (this tank, black, 1.9 SG) | 330 | 44 x 58 in | 80 lb |
| 1011600C26 (white) | 330 | 44 x 58 in | 80 lb |
| 1008200C34 (black, low) | 330 | 47 x 50 in | 85 lb |
| 1008200C26 (white, low) | 330 | 47 x 50 in | 85 lb |
| 1008200N42 (XLPE, low) | 330 | 47 x 50 in | 85 lb |
| 1011200C26 (slim) | 300 | 35 x 82 in | 85 lb |
| 5760100N42 (XLPE) | 360 | 53 x 59 in | 116 lb |
The 1011600C26 is this tank in white for indoors, where the level shows through the wall. The 1008200 family is the low 330 on a 47 inch base at 50 inches, in black, white and the cross-linked resin for oxidizers. The 1011200C26 stands 300 gallons on a 35 inch base at 82 inches for the narrowest corner, and the 5760100N42 is the 360 in the cross-linked resin on a 53 inch base at this tank's height.
Need two of them? Call 866-418-1777 and we will price the truck once.
Openings as shipped
- Outlet: 2 inch polypropylene female NPT bulkhead fitting, at the base; a flexible connector to hard pipe, the valve supported off the pad, and the reducer to the pump's suction at the pump.
- Access: 18 inch threaded, vented manway, 58 inches up, opened from the ground; fill from a tote through a dip tube, and vent outside on anything that fumes.
- Service limit: 120 F / 48 C.
The sight tube is the gauge on a black tank, read from the pad, and a low-level float shuts the pump off before it draws air. Mount the pump below the outlet so it primes by gravity, keep the manway closed against rain and vapor loss, and label the one chemical the tank holds. Where it freezes, wrap or trace the outlet valve and the first pipe run; the body takes ice from the top down without harm, and a black wall thaws first in the morning.
Outdoor duty at 330
The acid or caustic supply outside a boiler room door, a chemical tank at a lift station, the coagulant supply at a package plant with no building, a cooling tower treatment skid, and a spray-mix supply on a farm. If the liquid warrants a second wall, the Captor double wall freeboard guide explains what a contained tank gives up in usable volume at this size. Not a fire tank; the fire-water reservoir design guide works in thousands of gallons, and where a reuse system doses treatment chemical between storage stages, the industrial water reuse tank topology article shows where a tank this size sits.
Freight from Philippi
The 1011600C34 ships from Philippi, West Virginia as LTL freight at class 300; the freight cost estimator quotes it to your ZIP, and the listed price is before freight. Two people stand 80 pounds, or one walks it on a hand truck; at 44 inches across it goes through a double door. Fill it with water to the manway once and look at the outlet fitting for a weep, then drain and dry before the chemical goes in, and check the strap after the first windy week. Photograph the outlet fitting from below before the pipe goes on; a slow weep is easier to compare against than to describe.
Freight and documents
Ships from: Philippi, WV. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 1011600C34.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.