Snyder Industries 4100 Gallon ASTM Black Heavy Duty Vertical Storage Tank

The Snyder Industries 4100 Gallon ASTM Black Heavy Duty Vertical Storage Tank is a polyethylene vertical storage tank built to the ASTM D1998 upright-tank standard for demanding bulk water and liquid holding. It stands 130 inches tall on a 102 x 102-inch footprint and carries a 1.9 specific-gravity rating, so the wall thickness is engineered to hold liquids up to roughly 1.9 times the density of water. At 4,100 gallons of plain water that is about 34,194 pounds of contents, while the tank's rated ceiling is 64,969 pounds - meaning this heavy-duty black Snyder tank holds heavier solutions at the same 4,100-gallon capacity without derating, giving denser-liquid operations real headroom.

Will it work for your site?

Confirm three things before you buy: the footprint, the height, and the fittings. This vertical tank needs a level pad at least 102 x 102 inches, and at 130 inches tall it requires overhead clearance for fill lines and top access. Its top and sidewall fittings include a flange, an 18-inch PE threaded/vented fitting, a manway with 15-inch access, a 12 x 23-inch fitting, and a flat fitting - confirm gasket and bulkhead-fitting sizes, and verify outlet location and size, against the technical drawing on this page before ordering. The 15-inch manway access lets a worker reach inside for inspection and cleaning and takes a gasketed cover. Use the Tank Sizing Calculator and Tank Sizing Guide to match capacity and contents weight to your application, and plan freeboard for thermal expansion rather than reading 4,100 gallons as fully usable - our Snyder freeboard sizing guide (ASTM D1998) walks through the real volume you can use.

Freight and delivery

This is a large vertical storage tank and ships LTL freight from the Snyder plant in Philippi, West Virginia. Freight is quoted live to your ZIP - there is no flat rate on a tank this size. Run your ZIP through the Freight Cost Estimator or call 866-418-1777 for a quote and delivery timing.

One mistake to avoid

Do not undersize the pad or skip leveling. A black 4,100-gallon tank holding tens of thousands of pounds concentrates enormous load on its base, and an uneven or undersized foundation can lead to premature tank failure. Before delivery, review concrete pad sizing for above-ground polyethylene tanks so your foundation matches the full 102 x 102-inch footprint and the rated contents weight. If you are planning a fire-water reservoir or reuse installation, our fire-water reservoir design guide and industrial water reuse topology guide cover how a tank like this fits the larger system.

Ready to order this Snyder black vertical storage tank? Get your freight quote with the Freight Cost Estimator or call 866-418-1777 to confirm fittings, lead time, and shipping from Philippi, WV.