A 446 gallon carbon steel Supertainer tote with a stainless ball valve
The Snyder Industries 446 gallon carbon steel Supertainer IBC tote, part number 6984400B32210, is a steel tote 42 inches long, 48 inches wide and 59.25 inches tall, weighing 542 lb empty and listed in dark blue. It takes its fill through a 22 inch vented manway or a 2 inch access port and drains through a 2 inch 316 stainless steel ball valve. Full, it holds 3,720 lb of water (446 x 8.34), on a 42 by 48 inch footprint. Snyder publishes no specific gravity rating or service temperature for this steel tote, so tell us the liquid and we will confirm it with Snyder before you order, and send Snyder's current warranty terms with the order.
Choosing between sizes? Call 866-418-1777 with your batch volume and ceiling height, or get freight to your ZIP and add it to your cart above.
More volume on the same footprint
The point of this size is floor space. It holds 446 gallons on a 42 by 48 inch base, close to a standard pallet, by standing 59.25 inches tall. The trade is access: the manway sits at about shoulder height, so plan a step or a fill line rather than pouring in from a bucket, and keep a stable platform nearby for inspection and washing out. Steel takes the knocks of a plant floor or a yard and suits sites whose standard calls for a metal vessel. For the decision between totes, drums and a fixed tank, read our guide to when to buy a tote, a drum, a cube or a tank and the drum versus tote versus bulk tank break-even analysis.
Openings and what to check
- Outlet. A 2 inch 316 stainless ball valve at the bottom. Support the hose so its weight does not hang on the valve, and cap the valve whenever the tote moves.
- Inlet. A 2 inch access port for a hard-piped fill or a pump return, which matters more on a tote this tall.
- Manway. A 22 inch vented manway on top for filling, inspection and cleaning.
- The liquid. For corrosive liquids or iron-sensitive products, compare the 304 stainless versions below and check our chemical compatibility guide.
- Drinking water. Call us before you order for potable service and we will confirm what Snyder documents for this model.
- Containment. For regulated liquids, see the secondary containment guide for hazardous waste tank systems and our containment comparison.
- Drawing. The drawing linked on this page is filed under the 304 stainless Supertainer part 6984400B51303; confirm fitting positions on this part with us.
Sizes and versions nearby
One size down in carbon steel: the 350 gallon carbon steel Supertainer. One size up: the 550 gallon carbon steel Supertainer. The 446 gallon size in 304 stainless: 6984400B51303 and 6984400B51307. Each page carries its own dimensions and weight. Size the volume with the tank sizing calculator and the tank sizing guide.
Shipping and receiving
The tote ships LTL at freight class 125, 42 by 48 by 59 inches at 542 lb, from one of Snyder's plants at Lincoln, Nebraska; Marked Tree, Arkansas; or Merced, California. A dock or a forklift at your end is enough; confirm the lifting points with us before the first lift. The listed price is before freight; the freight cost estimator gives the lane cost to your ZIP. At the tailgate, check the part number against 6984400B32210 on the bill of lading, inspect the body, valve and manway for transit damage, cycle the valve, and fill it with water once to prove it before anything else goes in.
Ready to order? Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.
Freight and documents
Ships from: Marked Tree, AR; Merced, CA; Lincoln, NE. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Snyder Industries 6984400B32210.
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.
