The Snyder Industries 550 Gallon Carbon Steel Supertainer is a heavy-duty IBC tote tank built for bulk storage and repeated handling in industrial settings. With 550 gallons of capacity in a dark blue carbon steel body, it gives operations a rugged, reusable alternative to drums and disposable totes. This Supertainer measures 71.25 inches tall on a 48 x 42 inch footprint, so it slots onto standard pallet positions and moves cleanly through warehouse aisles and loading docks. If you are comparing it against other ibc tote or tote tank options, the details below cover the three questions that actually drive the decision.
Will it work for your operation?
This is a carbon steel IBC tote tank, not a polyethylene tank, so it carries no specific gravity rating. The carbon steel construction is what makes it a Supertainer: a stackable, forkliftable steel container for bulk fluid handling where a poly tote would not hold up to the demands of repeated transport and handling. The 550 gallon working capacity fits squarely in the gap between drums and stationary bulk tanks, which is exactly the decision a lot of buyers wrestle with. If you are weighing tote against drum against a fixed tank, the Container vs Tank guide and the Drum vs Tote vs Bulk Tank break-even analysis walk through the volume and turnover math that points to the right packaging tier. Carbon steel has real chemistry limits, so if you are storing anything beyond clean water, check your fluid against the steel in the Chemical Compatibility Database before you commit. See the technical drawing on this page for exact dimensions and port layout.
Weight, footprint, and handling
Plan your handling around the loaded weight. The 4,587 pound figure is the water-fill weight only; add the tare weight of the steel container itself, shown on the technical drawing, before you size the forklift, rack, and floor that will hold it. The 48.0 x 42.0 inch footprint keeps it on a standard pallet base, but the 71.25 inch height matters for stacking clearance, doorway transit, and rack shelf spacing. If your liquid is heavier than water, run your actual fluid through the Tank Sizing Calculator and the Tank Sizing Guide, because denser fluids push that loaded weight higher and change what your equipment needs to support. If you plan to double-stack filled units, confirm the loaded stacking limit against the technical drawing first.
Fittings and the common mistake
The mistake to avoid with any bulk tote is treating the container as the whole system. Before you order, confirm the fill and discharge port sizes, valve type, and gasket spec against the technical drawing on this page, or call us at 866-418-1777 so we can verify them with you and make sure your pump, cam-locks, and fittings will mate. Containment is the other half of the system: depending on what you store and where, you may need secondary containment under it. If you are handling hazardous waste, the RCRA 40 CFR 264.193 secondary containment guide covers the leak-detection and inspection cadence rules that apply to tote and tank systems, and the Snyder Captor Plus 110% containment vs UL-142 comparison lays out how containment options stack up against SPCC expectations. Sort the fittings and containment plan before the tote arrives, not after.
This Supertainer ships LTL freight from Michigan, quoted live to your ZIP code. Get a real number before you order with the Freight Cost Estimator, or call us at 866-418-1777 and we will work the quote with you. Listed price is before freight.
