Snyder Industries 6200 Gallon ASTM Black Heavy Duty Vertical Storage Tank

The Snyder Industries 6200 Gallon ASTM Black Heavy Duty Vertical Storage Tank is a large-format vertical storage tank molded in polyethylene for bulk water and industrial liquid storage. It stands 140 inches tall on a 120 x 120 inch footprint, and because width and length are equal it is a round tank roughly 120 inches in diameter sitting on that square bounding area. Its 1.9 specific gravity rating gives you real headroom over plain water. If you are working out whether this capacity matches your draw-down and refill cycle, the Tank Sizing Calculator and Tank Sizing Guide walk you through it.

Will it hold your liquid, and does it fit?

At full water it carries roughly 51,708 lb, and the 1.9 SG rating means it is engineered to hold contents weighing up to about 98,245 lb. Those numbers matter more than the gallon figure alone, because they decide your pad and your reach. Plan a level, engineered foundation sized to the roughly 120-inch round base and the loaded weight before delivery day, not a 10-foot square slab. The concrete pad sizing guide (ACI 360R-10 framework) covers how to detail a slab under an above-ground polyethylene tank of this size. This 1.9 rating is the heavy-duty spec for this model, so size your foundation to the full 98,245 lb figure.

Fittings and access

Per the technical drawing on this page, the tank carries a flange, flat-fitting locations molded at eight places on the standard 45-degree pattern, and a single 18-inch PE threaded manway. That top manway is your one interior access point for inspection and cleanout, so plan your entry and lighting around it. The flange and flat-fitting bosses are molded polyethylene; no gasket or seal material is called out on the drawing, so confirm the sealing and gasket material against your specific liquid before install. Check the fitting layout and elevations on the technical drawing against your fill, draw, and overflow plan before you set the tank.

Where it ships from and how it moves

This is a black vertical storage tank made by Snyder and shipped from Marked Tree, Arkansas. Because of its 140-inch height and 6,200-gallon size, it moves by LTL freight, quoted live to your ZIP code from Marked Tree, Arkansas. For rural fire-water and reservoir applications where a tank this size often lands, the fire-water reservoir design guide covers NFPA 22 sizing and freeze protection.

Get an LTL freight rate to your ZIP with the Freight Cost Estimator, or call 866-418-1777 and we will quote the freight from Marked Tree, Arkansas and confirm fitting, gasket, and pad details before you order.