The 2100 Gallon Vertical Liquid Storage Tank from Norwesco stands 89 inches tall on an 87-inch diameter footprint, holding 2,100 gallons of water or compatible liquid in natural white polyethylene. It carries a 1.5 specific gravity rating, meaning the wall is built to handle liquids up to 50 percent denser than water across the full 2,100-gallon volume. For potable water, irrigation, rainwater collection, bulk water hauling, or general liquid storage, this is a workhorse vertical storage tank from Norwesco.
Will it work for your site?
Plan your pad and your fill schedule around real weight, not just gallons. Filled with water, this tank carries 17,514 pounds of contents; loaded to its full 1.5 SG rating, it reaches 26,271 pounds. That load sits on an 87-inch diameter base, so you need a level, continuously supported concrete pad or compacted surface that holds the entire footprint with no gaps or point loads. The natural white translucent wall lets you read the liquid level by eye from outside, which is genuinely useful for monitoring fill on a vessel this size. If you are weighing this norwesco vertical tank against the taller 64" x 152" or the 102" x 69" 2,100-gallon configurations, note that this 87" x 89" build is the lowest-profile and widest-footprint of the three: it is the pick when overhead clearance (low roofs, soffits, gravity-fill headroom) is the constraint and floor space is not. Our Tank Sizing Calculator and Tank Sizing Guide help you confirm footprint and capacity against your space, and the complete buyer's guide for this exact tank walks through the decision in detail.
Fittings and the drawing
Confirm your inlet, outlet, and vent layout against the technical drawing on this page before you plumb the pad. The drawing is the authority for fitting locations and bulkhead placement on this specific model. Vertical storage tanks like this are typically gravity-fed from a top fill with a bottom outlet for draw, so route your supply and discharge lines to match what the drawing shows rather than assuming a standard layout.
Freight: how it ships
Two different weights matter here, and buyers conflate them at their peril. Shipping class is driven by cube: a 2,100-gallon vertical tank is large, light, and high-cube, so it moves by LTL freight quoted live to your ZIP. Siting is driven by loaded weight: your pad must hold the 17,514 pounds of water or 26,271 pounds at full 1.5 SG, not the empty shipping weight. Don't let the freight quote stand in for pad engineering. Norwesco rotomolds this model at plants in Fairfield, TX; Griffin, GA; Hanford, CA; Lancaster, OH; Owego, NY; Shawnee, OK; Sheldon, IA; St. Bonifacius, MN; and Tooele, UT, so your order ships from the location nearest you to keep transit short and freight reasonable.
Get an exact LTL number with the Freight Cost Estimator, or call us at 866-418-1777 and we will quote the nearest plant to your delivery ZIP and confirm specs against the technical drawing. One mistake to avoid: the 1.5 SG rating certifies the wall against liquid density only, not chemical attack. Before storing anything other than water, confirm both the resin and the fitting gaskets against your specific chemical, because the gasket and bulkhead seals shown on the technical drawing are usually the first thing a chemical degrades, not the wall. For service above 1.5 specific gravity, call 866-418-1777 and we will match you to a higher-rated tank.
3 Year Warranty
