The 750 Gallon Heavy Duty Vertical Storage Tank from Snyder Industries is a molded polyethylene vertical tank built for demanding water and heavy-liquid storage. It holds 750 gallons and carries a 1.9 specific gravity rating, which is exactly what separates a heavy-duty tank like this one from a standard water-only vertical tank. That rating means the tank wall is engineered to hold contents up to 1.9 times the weight of water without deforming over its service life.
Will it work for your site?
Full of water, this tank weighs about 6,255 lb, and it is rated to carry contents up to 11,884 lb at its maximum. Use both numbers to plan your pad and your fill limits. For standard potable or water storage, size the foundation around the everyday water load of roughly 6,255 lb; only plan for the full 11,884 lb ceiling if you are actually storing a denser liquid near the 1.9 SG rating. That keeps you from over-building a pad you do not need. See the technical drawing on this page for the tank's dimensions, fitting layout, and outlet placement so you can confirm footprint and plumbing before you order. If you are still deciding on capacity, our Tank Sizing Calculator and Tank Sizing Guide walk you through matching gallons to your real draw and refill cycle.
Foundation and heavy-load planning
A vertical storage tank at this weight needs a flat, fully supporting base. Because the loaded weight climbs quickly with heavier contents, size the pad for the real load you intend to store, not just for water. Our guide on concrete pad sizing for above-ground polyethylene tanks lays out the ACI 360R-10 framework for getting the foundation right. If this 750-gallon Snyder tank is going into a rural or remote water-reserve role, the fire-water reservoir design guide covers NFPA 22 sizing and cold-climate freeze protection, and our industrial water reuse topology guide is worth a read if this feeds a grey-water, rainwater, or condensate reuse train.
The mistake to avoid
The common error on a heavy-duty vertical tank is misreading the SG rating. The 1.9 specific gravity rating is the whole reason to choose this tank over a lighter water-only model, so do not order a standard-wall tank when you actually need to store a liquid heavier than water. The rating is a ceiling, not a suggestion: match it to your contents and do not fill past liquids rated at 1.9 SG. Then confirm your outlet and fitting sizes against the technical drawing before plumbing anything permanent, since fitting details are not published in this listing.
This tank ships by LTL freight from Snyder's plant in Chowchilla, California, quoted live to your ZIP code. Get a real number in seconds with our Freight Cost Estimator, or call 866-418-1777 and we will quote it for you. Buyers most often find this unit searching for a 750 gallon vertical storage tank or a Snyder vertical tank.
