A low 1000 gallon black vertical tank for spots with a height limit
The Norwesco 1000 gallon black vertical storage tank, part number 44111B, is a rotomoulded polyethylene tank 72 inches in diameter and 66 inches tall, weighing 174 lb empty. It is the short, wide way to store 1000 gallons: the manway sits at five and a half feet, low enough to reach from the ground. It comes with a 2 inch polypropylene female NPT bulkhead fitting as the outlet and a 16 inch threaded vented manway on top. Norwesco rates it for liquids up to 1.5 specific gravity, which covers water, most liquid fertilizers and many common chemicals; 1000 gallons of water weighs 8340 lb. The resin is FDA compliant per Norwesco, Norwesco lists its water tanks under NSF/ANSI 61 (the listing names no models), the service limit is 120 F, and Norwesco backs it with a 3 year warranty. Black keeps light out of the contents and slows algae in stored water.
Two ways to buy. Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.
Where the short tank wins
Under a lean-to, a shed eave, a deck, a carport or a low barn ceiling, 66 inches of height is the difference between a tank that fits and one that does not. The same height lets you fill and inspect it standing on the ground, and it drops the centre of gravity, which helps on a site with wind. The trade is the 72 inch footprint: six feet of clear, flat, level floor the whole way round. Gravel with stones in it will print into the bottom of a full tank, so use a poured pad, a slab that is already there, or compacted gravel with a sand cap. Our guide to the concrete pad framework for above ground polyethylene tanks covers size and thickness. If the tank is a rural fire reserve, read reservoir design for rural and remote sites; if it collects grey water or condensate, the reuse tank topology piece explains how to band storage by quality. Check the volume with the tank sizing calculator and the tank sizing guide.
Openings and fittings
- Outlet. A 2 inch polypropylene female NPT bulkhead fitting, factory installed low in the sidewall. A 2 inch ball valve, camlock or hose adapter threads straight in. Turn the valve to face the pipe run before you tighten it, and support the first length of pipe so the fitting carries liquid, not hardware.
- Manway. A 16 inch threaded vented manway on top. It takes a fill hose, a pump line, a float switch and a brush for cleaning. The vent lets the tank breathe as the level moves; do not plumb it shut.
- Liquid and temperature. Keep the contents at or below 1.5 specific gravity and 120 F. Heavier liquids need a heavy duty tank.
- Drawing. Norwesco's drawing for this tank, linked under Technical Drawing on this page, shows the outlet height and the manway position for planning the plumbing.
Sizes and versions nearby
Same tank in white, where you want to read the level through the wall: the 1000 gallon white vertical tank, 44111. Norwesco also builds 1000 gallons in a taller, narrower mould, the 1000 gallon black vertical tank, 40584 and its white twin 40152; pick that one when floor space is tight and height is not. A step down is the 1005 gallon black vertical tank, 44818B; a step up is the 1005 gallon vertical tank, 44818. The colour swatches above the price switch between the versions of this tank.
Shipping and receiving
The tank ships LTL at freight class 400 from Norwesco's Hanford, California plant, upright, 72 by 72 by 66 inches and 174 lb; two people can walk it off the truck. The listed price is before freight; the freight cost estimator gives the lane cost to your ZIP. At the tailgate, check the part number 44111B against the bill of lading, look over the sidewall and the bottom edge for transit damage, set it on the pad and fill it with water the first time before it carries anything else.
Questions before you order? Call 866-418-1777.
Freight and documents
Ships from: Hanford, CA. LTL freight is quoted to your ZIP with the freight cost estimator or by phone at 866-418-1777. The listed price is before freight.
Technical drawing (PDF) for Norwesco 44111B.
See this tank
Interactive 3D model with live fill. This tank has an interactive 3D model built to its manufacturer dimensions. Rotate it, and set a fill level to see how much liquid it holds at any height. Open the 3D view on the product photo above. Download the 3D model (GLB).
Ready to order?
Add it to your cart at the top of this page, get LTL freight to your ZIP, or call 866-418-1777. The listed price is before freight.