The Snyder Industries 2500 Gallon ASTM XLPE Vertical Storage Tank (SKU 8140000N40) is a crosslinked linear polyethylene vertical storage tank built to a 1.5 specific gravity rating, which is what separates it from a standard water-only tank. It stands 107 inches tall on a 90" diameter round base (90.0 x 90.0 inch footprint) and holds 2,500 gallons in Natural White resin. If you have been searching for a 2500 gallon vertical XLPE storage tank from Snyder, this is that tank.
Will it work for your site?
Because the wall is crosslinked polyethylene molded to ASTM standards, the 1.5 SG rating means this tank handles heavier-than-water liquids that a 1.0-rated water tank cannot, while remaining a straightforward choice for bulk water, rainwater, and reuse storage. Plan your pad for the loaded weight, not the empty shell:
- Full of water: approximately 20,850 lb
- Maximum rated contents (1.5 SG): up to 31,275 lb
Note that 2,500 gallons is nominal capacity. When you size usable volume, account for freeboard and thermal expansion — Snyder's freeboard sizing guide per ASTM D1998 walks through the real volume you can actually use. Run the numbers with the Tank Sizing Calculator and the Tank Sizing Guide to confirm this capacity and footprint fit your application before you order.
Fittings and access
Per the technical drawing on this page, this tank is configured with a flange, an 18" polyethylene threaded and vented fitting, and a manway with 15" access for entry, inspection, and cleanout. Match your bulkhead fitting, gasket, and thread sealant to the listed flange and 18" PE threaded port before plumbing, and confirm gasket sizing against the technical drawing dimensions so connections seat cleanly on the first pass. Note that some gallonage marks may be removed where fittings are placed, so review the technical drawing for exact fitting locations and elevations.
Freight and how to order
This 2,500-gallon tank is listed at its list price before freight and ships LTL from the Snyder plant in Marked Tree, Arkansas, quoted live to your ZIP. Because freight on a tank this size is priced by destination, run your address through the Freight Cost Estimator for a freight rate, or call 866-418-1777 and we will quote it and confirm the right fittings for your job. If this is going toward fire-protection reserve or a water-reuse train, our guides on fire-water reservoir design, concrete pad sizing, and industrial water reuse topology walk through sizing this tank into a larger system.
