Add-ons and Accessories

The Norwesco 16 Inch Hinged Locking Lid is a black polypropylene cover for a 16-inch tank opening. It hinges open for operator access and locks closed, so the opening stays covered between checks. The flange measures 18 x 18 inches with a 4-inch profile...

The 235 Gallon Bolt Down Hoop is a Norwesco steel tank band - hardware, not a tank. Each hoop is a 44 inch long, 2 inch wide steel ring standing about 28 inches tall and weighing roughly 12 pounds, made to seat around a tank body and bolt down. The part...

The Snyder Industries 1.5 Inch PP Threaded Bulkhead is a polypropylene tank fitting with an EPDM gasket that creates a sealed 1.5-inch threaded connection through a tank wall. It gives you a defined pipe connection point rather than a bare drilled hole...

The 3/4 Inch PVC Bulkhead Fitting from Snyder Industries is a socket-by-thread port assembly that seals a controlled outlet through a tank wall. It is molded in PVC at a 3/4-inch fitting size and ships with an EPDM gasket. This is a fitting, not a tank,...

This is Norwesco's 3" bolted fitting with a polypropylene (PP) body and a 3" female NPT thread, part number 62471. As a bolted-style fitting, it mounts to the tank rather than threading in like a standard bulkhead-style part, and the female NPT thread...

The Snyder Industries Septic Cistern Riser 12 (MPN SII-5160000W94201) is a residential and light-commercial septic vessel built for direct-bury service, with structural rib reinforcement rated for typical residential burial depths under standard backfill...

The 3/4 Inch PVC Flange Adapter from Snyder Industries is a PVC pipe-assembly fitting in a 3/4-inch nominal size. It is a plumbing fitting, not a tank, and it belongs to Snyder's Pipe Assemblies line of PVC adapters. What it is Material is PVC, sized at...

The 14 Inch Manway (PE) Threaded, Non-vented is a Snyder Industries polypropylene lid assembly - a black, threaded closure sized for a 14-inch threaded manway. It measures 15.4 x 15.4 inches across the flange with a 12.6-inch overall height and weighs...

The (1) 335 Gallon Bolt Down Hoop is a Norwesco steel support band sized to wrap and secure a 335-gallon tank. Each hoop measures 53 inches across the band by 29 inches tall with a 2-inch profile and weighs about 12 pounds. It is hardware for a tank, not...

The Snyder Industries 3/4 inch socket-by-thread fitting (SKU SII-34700751) pairs a CORZAN CPVC body with a VITON gasket — the materials pairing Snyder supplies for its own tanks. The connection is 3/4 inch nominal; the overall body is 2.75 inches square...

This is a 3-inch cistern U-vent assembly for the Snyder Industries NexGen D2, molded in PVC and shipping at about 4 pounds. It measures roughly 6 inches long by 3 inches wide and 4 inches tall, with a 3-inch diameter body. What it fits This is a Snyder...

The Norwesco Ladder Adapter Kit (SKU N-62301) is the steel mounting hardware that fits a ladder to a Norwesco 3135 leg tank, giving crews a fixed, repeatable way to reach the top fittings for filling, inspection, and routine service. It is an accessory...